5305-01-376-3573, SCREW,CAP,HEXAGON HEAD

National Stock Number:
5305-01-376-3573

Federal Supply Class:
5305

National Item Identification Number:
013763573

Description:
SCREW,CAP,HEXAGON HEAD

Detail:
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. The threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. The thread length being the controlled dimension, the grip length is not specified. A locking feature may be incorporated in the design of the head or threads. Excludes BOLT, MACHINE; BOLT, EXTERNALLY RELIEVED BODY; BOLT, INTERNAL WRENCHING; and SCREW, CAP, SOCKET HEAD.

Manufacturer Information:

FF-S-85	81348	FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
MS51107-34	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH	0.969 INCHES MINIMUM AND 1.000 INCHES MAXIMUM
HARDNESS RATING	32.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT	0.195 INCHES MINIMUM AND 0.211 INCHES MAXIMUM
HEAD STYLE	HEXAGON
MATERIAL DOCUMENT AND CLASSIFICATION	SAE J429,GRADE 8 ASSN STD ALL MATERIAL RESPONSES OVERALL
MATERIAL	STEEL OVERALL
MINIMUM TENSILE STRENGTH	7850 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.312 INCHES
NONDEFINITIVE SPEC/STD DATA	2 TYPE AND 8 GRADE AND 10P STYLE
SHANK UNTHREADED HOLE DIAMETER	0.074 INCHES MINIMUM AND 0.082 INCHES MAXIMUM FIRST HOLE
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-P-16232,TYPE Z,CLASS 2 MIL SPEC ALL TREATMENT RESPONSES OVERALL
SURFACE TREATMENT	PHOSPHATE ZINC OVERALL
THREAD CLASS	2A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.874 INCHES NOMINAL
THREAD QUANTITY PER INCH	18
THREAD SERIES DESIGNATOR	UNIFIED NATIONAL COARSE (UNC)
WIDTH BETWEEN FLATS	0.557 INCHES MINIMUM AND 0.577 INCHES MAXIMUM

Click here to Register for Free 30-day Trial