|
|
|
National Stock Number:
5305-01-371-9802
Federal Supply Class:
5305
National Item Identification Number:
013719802
Description:
SCREW ASSEMBLY,PANEL
Detail:
A HEADED, THREADED FASTENING DEVICE OVER WHICH MAY BE ASSEMBLED; (1) A STAND-OFF; (2) A FLANGED BUSHING WITH WASHER(S) AND/OR A SHOULDERED BUSHING WITHOUT A FLANGE, OR IT MAY HAVE AN INTERNALLY THREADED SLEEVE THAT IS AN INTEGRAL PART OF THE SCREW; A WASHER AND AN EXTERNALLY THREAD SELF-LOCKING BUSHING THAT IS DRIVEN BY AN INSERTED DRIVER. ATTACHED TO PANEL BY THREADED BUSHING OR BY FLARING END OF STAND-OFF, OR BUSHING. USED IN CONJUNCTION WITH A SPEED NUT, NUT PLATE, OR DRIVEN INTO A THREADED HOLE IN THE ITEM THAT THE PANEL IS FASTENED TO. MAY BE SPRING LOADED.
|
Manufacturer Information:
| 86197-0129 | 06481 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 86197-0129 | 13973 | LITTON SYSTEMS INC. DIV NAVIGATION SYSTEMS DIVISION | | 868197-0129 | 06481 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | FSC7900-10-B-8.5 | 0HDW7 | HUCK INTERNATIONAL, INC. | | 868197-0129 | 13973 | LITTON SYSTEMS INC. DIV NAVIGATION SYSTEMS DIVISION | | FSC7900-10-B-8.5 | 97928 | HUCK INTL INC |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNF | | NOMINAL THREAD DIAMETER | 0.190 INCHES | | THREAD QUANTITY PER INCH | 32 | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.235 INCHES MINIMUM AND | | 0.265 INCHES MAXIMUM | | FASTENER LENGTH | 1.422 INCHES MINIMUM AND | | 1.452 INCHES MAXIMUM | | MATERIAL | STEEL COMP 301 OR | | STEEL COMP 302 SECONDARY WASHER | | STEEL COMP 304 OR | | STEEL COMP 384 PRIMARY WASHER | | STEEL COMP 302 SPRING | | STEEL COMP 304 STAND-OFF | | STEEL COMP 302 OR | | STEEL COMP 305 OR | | STEEL COMP 316 OR | | STEEL COMP 384 FASTENER | | SURFACE TREATMENT | OXIDE SECONDARY WASHER | | OXIDE PRIMARY WASHER | | PASSIVATE SPRING | | OXIDE STAND-OFF | | OXIDE FASTENER | | HEAD STYLE | KNURLED NO. 3 | | HEAD DIAMETER | 0.365 INCHES NOMINAL | | HEAD HEIGHT | 0.133 INCHES NOMINAL | | INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 | | MATERIAL ACCOMMODATED THICKNESS | 0.032 INCHES MINIMUM AND | | 0.063 INCHES MAXIMUM |
|
|