|
|
|
National Stock Number:
5305-01-362-4459
Federal Supply Class:
5305
National Item Identification Number:
013624459
Description:
SCREW ASSEMBLY,PANEL
Detail:
A HEADED, THREADED FASTENING DEVICE OVER WHICH MAY BE ASSEMBLED; (1) A STAND-OFF; (2) A FLANGED BUSHING WITH WASHER(S) AND/OR A SHOULDERED BUSHING WITHOUT A FLANGE, OR IT MAY HAVE AN INTERNALLY THREADED SLEEVE THAT IS AN INTEGRAL PART OF THE SCREW; A WASHER AND AN EXTERNALLY THREAD SELF-LOCKING BUSHING THAT IS DRIVEN BY AN INSERTED DRIVER. ATTACHED TO PANEL BY THREADED BUSHING OR BY FLARING END OF STAND-OFF, OR BUSHING. USED IN CONJUNCTION WITH A SPEED NUT, NUT PLATE, OR DRIVEN INTO A THREADED HOLE IN THE ITEM THAT THE PANEL IS FASTENED TO. MAY BE SPRING LOADED.
|
Manufacturer Information:
| 171549H01 | 58794 | FASTENER TECHNOLOGY CORP | | 171549H01 | 61742 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | DP-7950-6-A-7 | 17446 | HUCK INTERNATIONAL, INC | | FT1255P-6-1-7 | 58794 | FASTENER TECHNOLOGY CORP | | DP-7950-6-A-7 | 97928 | HUCK INTL INC |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNC | | NOMINAL THREAD DIAMETER | 0.132 INCHES | | THREAD QUANTITY PER INCH | 32 | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | FASTENER LENGTH | 0.355 INCHES MINIMUM AND | | 0.395 INCHES MAXIMUM | | MATERIAL | ALUMINUM ALLOY 7075 STAND-OFF | | STEEL COMP 302 FASTENER | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/9 FED SPEC SINGLE MATERIAL RESPONSE OR | | AMS 4122 ASSN STD SINGLE MATERIAL RESPONSE STAND-OFF | | ASTM A581 ASSN STD SINGLE MATERIAL RESPONSE OR | | AMS 5636 ASSN STD SINGLE MATERIAL RESPONSE FASTENER | | SURFACE TREATMENT | CHROMATE OR | | ANODIZE STAND-OFF | | PASSIVATE FASTENER | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541 MIL SPEC 1ST TREATMENT RESPONSE OR | | MIL-A-8625 MIL SPEC 2ND TREATMENT RESPONSE STAND-OFF | | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE FASTENER | | HEAD STYLE | PAN | | HEAD DIAMETER | 0.250 INCHES MINIMUM AND | | 0.290 INCHES MAXIMUM | | HEAD HEIGHT | 0.100 INCHES MINIMUM AND | | 0.150 INCHES MAXIMUM | | INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 | | MATERIAL ACCOMMODATED THICKNESS | 0.049 INCHES MINIMUM AND | | 0.059 INCHES MAXIMUM |
|
|