5305-01-350-4553 SCREW,CLOSE TOLERANCE Index 4710-01-350-4555 PIPE,METALLIC

National Stock Number:
5305-01-350-4554

Federal Supply Class:
5305

National Item Identification Number:
013504554

Description:
SCREW ASSEMBLY,PANEL

Detail:
A HEADED, THREADED FASTENING DEVICE OVER WHICH MAY BE ASSEMBLED; (1) A STAND-OFF; (2) A FLANGED BUSHING WITH WASHER(S) AND/OR A SHOULDERED BUSHING WITHOUT A FLANGE, OR IT MAY HAVE AN INTERNALLY THREADED SLEEVE THAT IS AN INTEGRAL PART OF THE SCREW; A WASHER AND AN EXTERNALLY THREAD SELF-LOCKING BUSHING THAT IS DRIVEN BY AN INSERTED DRIVER. ATTACHED TO PANEL BY THREADED BUSHING OR BY FLARING END OF STAND-OFF, OR BUSHING. USED IN CONJUNCTION WITH A SPEED NUT, NUT PLATE, OR DRIVEN INTO A THREADED HOLE IN THE ITEM THAT THE PANEL IS FASTENED TO. MAY BE SPRING LOADED.


Manufacturer Information:
841581-027206481NORTHROP GRUMMAN SYSTEMS CORPORATION
841581-027213973LITTON SYSTEMS INC. DIV NAVIGATION SYSTEMS DIVISION
841581-27206481NORTHROP GRUMMAN SYSTEMS CORPORATION
841581-27213973LITTON SYSTEMS INC. DIV NAVIGATION SYSTEMS DIVISION
DSD7900-10-B-4.517419DEUTSCH CO THE
FT1046-272A58794FASTENER TECHNOLOGY CORP


Techincal Specification:
COLORBLACK FASTENER
COLORBLACK PRIMARY WASHER
COLORBLACK SECONDARY WASHER
COLORBLACK STAND-OFF
FASTENER LENGTH0.922 INCHES MINIMUM AND 0.952 INCHES MAXIMUM
HEAD HEIGHT0.095 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
HEAD DIAMETER0.350 INCHES MINIMUM AND 0.380 INCHES MAXIMUM
HEAD STYLEPAN
INTERNAL DRIVE STYLESLOT
MATERIAL ACCOMMODATED THICKNESS0.084 INCHES MINIMUM AND 0.104 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5688 ASSN STD SINGLE MATERIAL RESPONSE SPRING
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A493 ASSN STD SINGLE MATERIAL RESPONSE FASTENER
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A493 ASSN STD SINGLE MATERIAL RESPONSE PRIMARY WASHER
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE FIRST SHOULDER
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE STAND-OFF
MATERIALSTEEL COMP 304 STAND-OFF
MATERIALSTEEL COMP 302 FASTENER
MATERIALSTEEL COMP 302 PRIMARY WASHER
MATERIALSTEEL COMP 302 SPRING
MATERIALSTEEL COMP 303 SECONDARY WASHER
NOMINAL THREAD DIAMETER0.190 INCHES
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-C-13934 MIL SPEC SINGLE TREATMENT RESPONSE FASTENER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-C-13934 MIL SPEC SINGLE TREATMENT RESPONSE PRIMARY WASHER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-C-13934 MIL SPEC SINGLE TREATMENT RESPONSE SECONDARY WASHER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-C-13934 MIL SPEC SINGLE TREATMENT RESPONSE STAND-OFF
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE SPRING
SURFACE TREATMENTOXIDE FASTENER
SURFACE TREATMENTOXIDE PRIMARY WASHER
SURFACE TREATMENTOXIDE SECONDARY WASHER
SURFACE TREATMENTOXIDE STAND-OFF
SURFACE TREATMENTPASSIVATE SPRING
THREAD LENGTH0.235 INCHES MINIMUM AND 0.280 INCHES MAXIMUM
THREAD CLASS2A
THREAD DIRECTIONRIGHT-HAND
THREAD QUANTITY PER INCH32
THREAD SERIES DESIGNATORUNF


Click here to Register for Free 30-day Trial

© 2026 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us