5305-01-341-4681, SCREW,EXTERNALLY RELIEVED BODY

5305-01-341-4680 SCREW,EXTERNALLY RELIEVED BODY

5305-01-341-4682 SCREW,EXTERNALLY RELIEVED BODY

National Stock Number:
5305-01-341-4681

Federal Supply Class:
5305

National Item Identification Number:
013414681

Description:
SCREW,EXTERNALLY RELIEVED BODY

Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.

Manufacturer Information:

A320A629-101

88818

KEARFOTT CORPORATION

Techincal Specification:

DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER	0.110 INCHES NOMINAL
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SECOND DIAMETER	0.445 INCHES MINIMUM AND 0.450 INCHES MAXIMUM
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY	1
FASTENER LENGTH	0.685 INCHES MINIMUM AND 0.700 INCHES MAXIMUM
FIRST DIAMETER FROM HEAD	0.138 INCHES NOMINAL
HEAD DIAMETER	0.218 INCHES MINIMUM AND 0.226 INCHES MAXIMUM
HEAD HEIGHT	0.134 INCHES MINIMUM AND 0.138 INCHES MAXIMUM
HEAD STYLE	FLAT CHAMFER
INTERNAL DRIVE STYLE	HEXAGON
MATERIAL DOCUMENT AND CLASSIFICATION	AMS5643 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	STEEL COMP 630 OVERALL
PROPRIETARY CHARACTERISTICS	PACS
NOMINAL THREAD DIAMETER	0.138 INCHES
SECOND DIAMETER FROM HEAD	0.095 INCHES MINIMUM AND 0.100 INCHES MAXIMUM
WIDTH ACROSS FLATS	0.109 INCHES MINIMUM AND 0.111 INCHES MAXIMUM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	PASSIVATE OVERALL
THREAD CLASS	2A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.250 INCHES NOMINAL
THREAD QUANTITY PER INCH	32
THREAD SERIES DESIGNATOR	UNC

Click here to Register for Free 30-day Trial