|
|
|
National Stock Number:
5305-01-337-5470
Federal Supply Class:
5305
National Item Identification Number:
013375470
Description:
SCREW,CLOSE TOLERANCE
Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
|
Manufacturer Information:
| HT359RNE4-10 | 03950 | NAVAL INVENTORY CONTROL POINT MECHANICSBURG | | HT359RNE4-10 | 73197 | HI-SHEAR CORPORATION | | HT359RNE4-10 | L4528 | LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INC |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNJF | | NOMINAL THREAD DIAMETER | 0.250 INCHES | | THREAD QUANTITY PER INCH | 28 | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.403 INCHES NOMINAL | | FASTENER LENGTH | 1.012 INCHES MINIMUM AND | | 1.059 INCHES MAXIMUM | | MATERIAL | RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR RING | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 4967 ASSN STD SINGLE MATERIAL RESPONSE FASTENER | | SURFACE TREATMENT | PHOSPHATE FASTENER | | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH | | HEAD STYLE | FLAT COUNTERSUNK UNDERCUT | | HEAD DIAMETER | 0.475 INCHES MINIMUM AND | | 0.507 INCHES MAXIMUM | | HEAD HEIGHT | 0.071 INCHES MINIMUM AND | | 0.073 INCHES MAXIMUM | | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND | | 101.0 DEGREES MAXIMUM | | INTERNAL DRIVE STYLE | HIGH-TORQUE | | GRIP LENGTH | 0.615 INCHES MINIMUM AND | | 0.635 INCHES MAXIMUM | | GRIP DIAMETER | 0.2490 INCHES MINIMUM AND | | 0.2495 INCHES MAXIMUM | | SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD | | FEATURES PROVIDED | O RING | | PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT |
|
|