5305-01-333-2845, SCREW ASSEMBLY,PANEL

4540-01-333-2846 HEATING ELEMENT,ELECTRICAL,NONIMMERSION TYPE

National Stock Number:
5305-01-333-2845

Federal Supply Class:
5305

National Item Identification Number:
013332845

Description:
SCREW ASSEMBLY,PANEL

Detail:
A HEADED, THREADED FASTENING DEVICE OVER WHICH MAY BE ASSEMBLED; (1) A STAND-OFF; (2) A FLANGED BUSHING WITH WASHER(S) AND/OR A SHOULDERED BUSHING WITHOUT A FLANGE, OR IT MAY HAVE AN INTERNALLY THREADED SLEEVE THAT IS AN INTEGRAL PART OF THE SCREW; A WASHER AND AN EXTERNALLY THREAD SELF-LOCKING BUSHING THAT IS DRIVEN BY AN INSERTED DRIVER. ATTACHED TO PANEL BY THREADED BUSHING OR BY FLARING END OF STAND-OFF, OR BUSHING. USED IN CONJUNCTION WITH A SPEED NUT, NUT PLATE, OR DRIVEN INTO A THREADED HOLE IN THE ITEM THAT THE PANEL IS FASTENED TO. MAY BE SPRING LOADED.

Manufacturer Information:

3908-00044	33827	BAE SYSTEMS INTEGRATED DEFENSE SOLUTIONS INC.
CA13210-06-28PP	71286	HOWMET GLOBAL FASTENING SYSTEMS INC

Techincal Specification:

FASTENER LENGTH	0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM
HEAD DIAMETER	0.260 INCHES NOMINAL
HEAD HEIGHT	0.190 INCHES MAXIMUM
HEAD STYLE	PAN
INTERNAL DRIVE STYLE	CROSS RECESS TYPE 1
MATERIAL ACCOMMODATED THICKNESS	0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE PRIMARY WASHER
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-225/9 FED SPEC SINGLE MATERIAL RESPONSE STAND-OFF
MATERIAL	ALUMINUM ALLOY 7075 STAND-OFF
MATERIAL	STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303 PLUS X OR STEEL COMP 303SE OR STEEL COMP 303CU OR STEEL COMP 303MA OR STEEL COMP 304 OR STEEL COMP 304L FASTENER
MATERIAL	STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303 PLUS X OR STEEL COMP 303SE OR STEEL COMP 303CU OR STEEL COMP 303MA OR STEEL COMP 304 OR STEEL COMP 304L SECONDARY WASHER
MATERIAL	STEEL COMP 302 PRIMARY WASHER
NOMINAL THREAD DIAMETER	0.138 INCHES
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE STAND-OFF
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE FASTENER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE PRIMARY WASHER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE SECONDARY WASHER
SURFACE TREATMENT	CHROMATE STAND-OFF
SURFACE TREATMENT	PASSIVATE FASTENER
SURFACE TREATMENT	PASSIVATE PRIMARY WASHER
SURFACE TREATMENT	PASSIVATE SECONDARY WASHER
THREAD CLASS	2A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM
THREAD SERIES DESIGNATOR	UNIFIED NATIONAL COARSE (UNC)
THREAD QUANTITY PER INCH	32

Click here to Register for Free 30-day Trial