|
|
|
National Stock Number:
5305-01-322-7320
Federal Supply Class:
5305
National Item Identification Number:
013227320
Description:
SCREW ASSEMBLY,PANEL
Detail:
A HEADED, THREADED FASTENING DEVICE OVER WHICH MAY BE ASSEMBLED; (1) A STAND-OFF; (2) A FLANGED BUSHING WITH WASHER(S) AND/OR A SHOULDERED BUSHING WITHOUT A FLANGE, OR IT MAY HAVE AN INTERNALLY THREADED SLEEVE THAT IS AN INTEGRAL PART OF THE SCREW; A WASHER AND AN EXTERNALLY THREAD SELF-LOCKING BUSHING THAT IS DRIVEN BY AN INSERTED DRIVER. ATTACHED TO PANEL BY THREADED BUSHING OR BY FLARING END OF STAND-OFF, OR BUSHING. USED IN CONJUNCTION WITH A SPEED NUT, NUT PLATE, OR DRIVEN INTO A THREADED HOLE IN THE ITEM THAT THE PANEL IS FASTENED TO. MAY BE SPRING LOADED.
|
Manufacturer Information:
| 53-99-273-22 | 94222 | SOUTHCO INC | | CA8010-8-A-2Q | 29372 | HOWMET GLOBAL FASTENING SYSTEMS INC. | | HRT7900-8Q-A-2 | 0HDW7 | HUCK INTERNATIONAL, INC. | | FT1400-8Q-1-2 | 58794 | FASTENER TECHNOLOGY CORP | | SM-A-876256-1 | 80063 | US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR | | HRT7900-8Q-A-2 | 97928 | HUCK INTL INC |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNC | | NOMINAL THREAD DIAMETER | 0.164 INCHES | | THREAD QUANTITY PER INCH | 32 | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | FASTENER LENGTH | 0.750 INCHES NOMINAL | | MATERIAL | STEEL COMP 302B SPRING | | STEEL COMP 304 STAND-OFF | | STEEL COMP 302 OR | | STEEL COMP 304 OR | | STEEL COMP 305 OR | | STEEL COMP 316 OR | | STEEL COMP 321 OR | | STEEL COMP 347 OR | | STEEL COMP 384 OR | | STEEL COMP 385 FASTENER | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM-580,COND B ASSN STD SINGLE MATERIAL RESPONSE SPRING | | MIL-S-23195 MIL SPEC SINGLE MATERIAL RESPONSE STAND-OFF | | ASTM-A493 ASSN STD ALL MATERIAL RESPONSES FASTENER | | SURFACE TREATMENT | PASSIVATE SPRING | | OXIDE STAND-OFF | | OXIDE FASTENER | | COLOR | BLACK STAND-OFF | | BLACK FASTENER | | HEAD STYLE | HEXAGON | | HEAD HEIGHT | 0.096 INCHES MINIMUM AND | | 0.110 INCHES MAXIMUM | | WIDTH BETWEEN FLATS | 0.244 INCHES MINIMUM AND | | 0.250 INCHES MAXIMUM | | INTERNAL DRIVE STYLE | SLOT | | MATERIAL ACCOMMODATED THICKNESS | 0.030 INCHES NOMINAL |
|
|