5305-01-315-3561, SCREW,CLOSE TOLERANCE

National Stock Number:
5305-01-315-3561

Federal Supply Class:
5305

National Item Identification Number:
013153561

Description:
SCREW,CLOSE TOLERANCE

Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.

Manufacturer Information:

NA0038-060038

80205

NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE

Techincal Specification:

THREAD SERIES DESIGNATOR	MJ
NOMINAL THREAD DIAMETER	6.0 MILLIMETERS
THREAD PITCH IN MILLIMETERS	1.0
EXTERNAL THREAD TOLERANCE CLASS	4H6H
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	9.5 MILLIMETERS MINIMUM AND
	10.5 MILLIMETERS MAXIMUM
FASTENER LENGTH	47.7 MILLIMETERS MINIMUM AND
	48.3 MILLIMETERS MAXIMUM
MATERIAL	STEEL COMP E4340 OR
	STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR
	MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OVERALL
SURFACE TREATMENT	CADMIUM AND
	CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416 TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
HARDNESS RATING	36.0 ROCKWELL C MINIMUM AND
	40.0 ROCKWELL C MAXIMUM OVERALL
MINIMUM TENSILE STRENGTH	660 MEGAPASCALS
HEAD STYLE	FLAT COUNTERSUNK
HEAD DIAMETER	10.8 MILLIMETERS MINIMUM AND
	12.0 MILLIMETERS MAXIMUM
COUNTERSINK ANGLE	99.5 DEGREES MINIMUM AND
	100.5 DEGREES MAXIMUM
INTERNAL DRIVE STYLE	OFFSET CRUCIFORM (TORQUE SET)
GRIP LENGTH	37.8 MILLIMETERS MINIMUM AND
	38.2 MILLIMETERS MAXIMUM
GRIP DIAMETER	5.965 MILLIMETERS MINIMUM AND
	5.990 MILLIMETERS MAXIMUM
SURFACE FINISH	0.8 MICROMETERS BEARING SURFACE OF HEAD
	0.8 MICROMETERS GRIP
	0.8 MICROMETERS THREADS
SPECIFICATION/STANDARD DATA	80205-NA0038 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD

Click here to Register for Free 30-day Trial