|
|
|
National Stock Number:
5305-01-313-6662
Federal Supply Class:
5305
National Item Identification Number:
013136662
Description:
SCREW,CLOSE TOLERANCE
Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
|
Manufacturer Information:
| 10113679 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 5305PL0784899 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | 7005497 | 1DN91 | STANDARD AERO PARTS, INC | | 7005497 | 1ER65 | 3-V FASTENER CO., INC. | | 7005497 | 1V757 | WESCO AIRCRAFT HARDWARE CORP. | | 7005497 | 5D4G2 | TEC AEROSPACE LLC | | 7005497 | 82577 | RAYTHEON COMPANY |
|
Techincal Specification:
| COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL | | FASTENER LENGTH | 0.586 INCHES MINIMUM AND 0.616 INCHES MAXIMUM | | HEAD STYLE | FLAT COUNTERSUNK | | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) | | MATERIAL | STEEL CORROSION RESISTING OVERALL | | NOMINAL THREAD DIAMETER | 0.250 INCHES | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) | | THREAD QUANTITY PER INCH | 28 |
|
|