|
|
|
National Stock Number:
5305-01-310-9251
Federal Supply Class:
5305
National Item Identification Number:
013109251
Description:
SCREW,CLOSE TOLERANCE
Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
|
Manufacturer Information:
| 11935-3DL10A | 59563 | REID PRODUCTS INC. | | HT4057-3D10A | 06950 | HOWMET GLOBAL FASTENING SYSTEMS INC | | HT4057-3D10A | 17446 | HUCK INTERNATIONAL, INC | | HT4057-3D10A | 73197 | HI-SHEAR CORPORATION | | HT4057-3D10A | 80539 | SPS TECHNOLOGIES, LLC | | HT4057-3D10A | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC | | ST3M733-3DL10A | 76301 | THE BOEING COMPANY | | HT4057-3D10A | 97928 | HUCK INTL INC | | HT4057-3D10A | L4528 | LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INC |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNJF | | NOMINAL THREAD DIAMETER | 0.190 INCHES | | THREAD QUANTITY PER INCH | 32 | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.381 INCHES MINIMUM AND | | 0.431 INCHES MAXIMUM | | FASTENER LENGTH | 1.016 INCHES MINIMUM AND | | 1.046 INCHES MAXIMUM | | MATERIAL | STEEL COMP XM-13 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | ALUMINUM AND | | CHROMATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-83488 TY,2,CL 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | MINIMUM TENSILE STRENGTH | 125000 POUNDS PER SQUARE INCH | | HEAD STYLE | FLAT COUNTERSUNK UNDERCUT | | HEAD DIAMETER | 0.338 INCHES MINIMUM AND | | 0.381 INCHES MAXIMUM | | HEAD HEIGHT | 0.080 INCHES NOMINAL | | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND | | 101.0 DEGREES MAXIMUM | | INTERNAL DRIVE STYLE | HIGH-TORQUE | | GRIP LENGTH | 0.615 INCHES MINIMUM AND | | 0.635 INCHES MAXIMUM | | GRIP DIAMETER | 0.1885 INCHES MINIMUM AND | | 0.1895 INCHES MAXIMUM | | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 0.935 INCHES MINIMUM AND | | 0.995 INCHES MAXIMUM FIRST HOLE | | SHANK UNTHREADED HOLE DIAMETER | 0.070 INCHES MINIMUM AND | | 0.080 INCHES MAXIMUM FIRST HOLE | | FEATURES PROVIDED | CETYL ALCOHOL LUBRICANT | | SPECIAL FEATURES | LUBRICANT PER MIL-C-83488,TY 2,CL 3 |
|
|