|
|
|
National Stock Number:
5305-01-306-0109
Federal Supply Class:
5305
National Item Identification Number:
013060109
Description:
SCREW ASSEMBLY,PANEL
Detail:
A HEADED, THREADED FASTENING DEVICE OVER WHICH MAY BE ASSEMBLED; (1) A STAND-OFF; (2) A FLANGED BUSHING WITH WASHER(S) AND/OR A SHOULDERED BUSHING WITHOUT A FLANGE, OR IT MAY HAVE AN INTERNALLY THREADED SLEEVE THAT IS AN INTEGRAL PART OF THE SCREW; A WASHER AND AN EXTERNALLY THREAD SELF-LOCKING BUSHING THAT IS DRIVEN BY AN INSERTED DRIVER. ATTACHED TO PANEL BY THREADED BUSHING OR BY FLARING END OF STAND-OFF, OR BUSHING. USED IN CONJUNCTION WITH A SPEED NUT, NUT PLATE, OR DRIVEN INTO A THREADED HOLE IN THE ITEM THAT THE PANEL IS FASTENED TO. MAY BE SPRING LOADED.
|
Manufacturer Information:
| 470109-3 | 24930 | L3HARRIS TECHNOLOGIES, INC | | FSC3102P-3-5-C | 58998 | FASTENER INNOVATION TECHNOLOGY, INC. | | FSCU7900-10C5 | 0HDW7 | HUCK INTERNATIONAL, INC. | | FSCU7900-10-C-5 | 17446 | HUCK INTERNATIONAL, INC | | FSCU7900-10C5 | 97928 | HUCK INTL INC | | FSCU7900-10-C-5 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH | | G470109-3 | 24930 | L3HARRIS TECHNOLOGIES, INC | | FT1352-P-10-3-5 | 58794 | FASTENER TECHNOLOGY CORP |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNF | | NOMINAL THREAD DIAMETER | 0.190 INCHES | | THREAD QUANTITY PER INCH | 32 | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.250 INCHES NOMINAL | | FASTENER LENGTH | 1.000 INCHES NOMINAL | | MATERIAL | STEEL COMP 301 SECONDARY WASHER | | STEEL COMP 302 PRIMARY WASHER | | STEEL COMP 302 SPRING | | STEEL COMP 304 STAND-OFF | | STEEL COMP 302 FASTENER | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE SECONDARY WASHER | | ASTM A493 ASSN STD SINGLE MATERIAL RESPONSE PRIMARY WASHER | | AMS 5688 ASSN STD SINGLE MATERIAL RESPONSE SPRING | | MIL-S-23195 MIL SPEC SINGLE MATERIAL RESPONSE STAND-OFF | | ASTM A493 ASSN STD SINGLE MATERIAL RESPONSE FASTENER | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | HEAD STYLE | KNURLED NO. 4 | | HEAD DIAMETER | 0.365 INCHES NOMINAL | | HEAD HEIGHT | 0.133 INCHES NOMINAL | | INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 | | MATERIAL ACCOMMODATED THICKNESS | 0.064 INCHES MINIMUM AND | | 0.125 INCHES MAXIMUM |
|
|