|
|
|
National Stock Number:
5305-01-299-6600
Federal Supply Class:
5305
National Item Identification Number:
012996600
Description:
SCREW,CAP,SOCKET HEAD
Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter. The head has an internal socket or multiple spline for use with an inserted driver. A locking feature may be incorporated in the design of the head or threads. Excludes items with bevel (conical) heads. See BOLT, INTERNAL WRENCHING. Excludes SCREW, SHOULDER; and SCREW, MACHINE.
|
Manufacturer Information:
| FF-S-86 | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | MS24674-51 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | MS24674-51 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNC | | NOMINAL THREAD DIAMETER | 0.375 INCHES | | THREAD QUANTITY PER INCH | 16 | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 1.500 INCHES MINIMUM AND | | 1.810 INCHES MAXIMUM | | FASTENER LENGTH | 1.960 INCHES MINIMUM AND | | 2.000 INCHES MAXIMUM | | MATERIAL | STEEL COMP 302 OR | | STEEL COMP 304 OR | | STEEL COMP 305 OR | | STEEL COMP 316 OR | | STEEL COMP 384 OR | | STEEL COMP XM-7 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A 493 ASSN STD ALL MATERIAL RESPONSES OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 80.0 ROCKWELL B MINIMUM OVERALL | | MINIMUM TENSILE STRENGTH | 80000 POUNDS PER SQUARE INCH | | MINIMUM YIELD STRENGTH | 30000 POUNDS PER SQUARE INCH | | HEAD STYLE | FLAT CHAMFER | | HEAD DIAMETER | 0.550 INCHES MINIMUM AND | | 0.562 INCHES MAXIMUM | | HEAD HEIGHT | 0.368 INCHES MINIMUM AND | | 0.375 INCHES MAXIMUM | | INTERNAL DRIVE STYLE | HEXAGON | | WIDTH ACROSS FLATS | 0.3125 INCHES MINIMUM AND | | 0.3160 INCHES MAXIMUM | | HOLE CONFIGURATION STYLE | ROUND INTERNAL HEXAGON | | HOLE TYPE | DRILLED | | HOLE QUANTITY | 3 | | HOLE DIAMETER | 0.061 INCHES MINIMUM AND | | 0.067 INCHES MAXIMUM | | SPECIAL FEATURES | HEAD SHALL BE CHAMFERED 45 DEGREES BY 0.010 MIN TO 0.020 MAX DEEP |
|
|