|
|
|
National Stock Number:
5305-01-293-6652
Federal Supply Class:
5305
National Item Identification Number:
012936652
Description:
SCREW,CLOSE TOLERANCE
Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
|
Manufacturer Information:
| 106706T-5-22 | 80539 | SPS TECHNOLOGIES, LLC | | GB510CE5-22 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | HR204JK-5-22 | 03950 | NAVAL INVENTORY CONTROL POINT MECHANICSBURG | | HR204JK-5-22 | 73197 | HI-SHEAR CORPORATION | | HR20JK-5-22 | 73197 | HI-SHEAR CORPORATION | | HR204JK-5-22 | L4528 | LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INC | | SCD1779-5-22 | 06950 | HOWMET GLOBAL FASTENING SYSTEMS INC | | PBF1202-5-22 | 27524 | HARTER GROUP THE |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNJF | | NOMINAL THREAD DIAMETER | 0.312 INCHES | | THREAD QUANTITY PER INCH | 24 | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.454 INCHES MINIMUM AND | | 0.521 INCHES MAXIMUM | | FASTENER LENGTH | 1.839 INCHES MINIMUM AND | | 1.886 INCHES MAXIMUM | | MATERIAL | STEEL COMP 4047H OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM AND | | CHROMATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | NAS 672 ASSN STD SINGLE TREATMENT RESPONSE OVERALL | | MINIMUM TENSILE STRENGTH | 220000 POUNDS PER SQUARE INCH | | HEAD STYLE | FLAT COUNTERSUNK | | HEAD DIAMETER | 0.578 INCHES MINIMUM AND | | 0.634 INCHES MAXIMUM | | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND | | 101.0 DEGREES MAXIMUM | | INTERNAL DRIVE STYLE | TORQUE-SET RIBBED | | GRIP LENGTH | 1.365 INCHES MINIMUM AND | | 1.385 INCHES MAXIMUM | | GRIP DIAMETER | 0.3110 INCHES MINIMUM AND | | 0.3120 INCHES MAXIMUM | | SURFACE FINISH | 32.0 MICROINCHES GRIP | | 32.0 MICROINCHES THREADS | | PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT |
|
|