5305-01-284-9665, SCREW,EXTERNALLY RELIEVED BODY

5305-01-284-9666 SCREW,EXTERNALLY RELIEVED BODY

National Stock Number:
5305-01-284-9665

Federal Supply Class:
5305

National Item Identification Number:
012849665

Description:
SCREW,EXTERNALLY RELIEVED BODY

Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.

Manufacturer Information:

129295-1	8B865	J & S PRECISION PRODUCTS CO INC
129295-1	94271	LOCKHEED MARTIN CORP
LL-HX5-8107	14153	DEFENSE LOGISTICS AGENCY DBA DEFENSE SUPPLY CENTER PHILADELPHIA

Techincal Specification:

DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SECOND DIAMETER	0.416 INCHES NOMINAL
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER	0.249 INCHES MINIMUM AND 0.259 INCHES MAXIMUM
CRITICALITY CODE JUSTIFICATION	ZZZY
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY	1
FASTENER LENGTH	0.666 INCHES NOMINAL
FIRST DIAMETER FROM HEAD	0.154 INCHES MINIMUM AND 0.156 INCHES MAXIMUM
HEAD DIAMETER	0.276 INCHES MINIMUM AND 0.281 INCHES MAXIMUM
HEAD HEIGHT	0.112 INCHES NOMINAL
HEAD STYLE	FLAT CHAMFER
INTERNAL DRIVE STYLE	SLOT
MATERIAL DOCUMENT AND CLASSIFICATION	ASTM 276 ASSN STD 1ST MATERIAL RESPONSE OR ASTM A479 ASSN STD 2ND MATERIAL RESPONSE OVERALL
MATERIAL	STEEL COMP 302 OR STEEL COMP 304 OVERALL
NOMINAL THREAD DIAMETER	0.112 INCHES
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS	AS DIFFERENTIATED BY MATERIAL WHICH MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS
SECOND DIAMETER FROM HEAD	0.075 INCHES MINIMUM AND 0.080 INCHES MAXIMUM
SPECIAL TEST FEATURES	SPECIAL QUALITY CONTROL TESTING
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MI5-25 CAGE 94271 MFR REF SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	PASSIVATE OVERALL
TEST DATA DOCUMENT	81349-MIL-P-23199 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
THREAD LENGTH	0.250 INCHES NOMINAL
THREAD CLASS	2A
THREAD DIRECTION	RIGHT-HAND
THREAD QUANTITY PER INCH	40
THREAD SERIES DESIGNATOR	UNIFIED NATIONAL COARSE (UNC)

Click here to Register for Free 30-day Trial