|
|
|
National Stock Number:
5305-01-284-4747
Federal Supply Class:
5305
National Item Identification Number:
012844747
Description:
SCREW,CLOSE TOLERANCE
Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
|
Manufacturer Information:
| CA2194-3-07 | 29372 | HOWMET GLOBAL FASTENING SYSTEMS INC. | | CA2194-3-07 | 58998 | FASTENER INNOVATION TECHNOLOGY, INC. | | LE111-0003-3007 | 43999 | THE BOEING COMPANY |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNJF | | NOMINAL THREAD DIAMETER | 0.190 INCHES | | THREAD QUANTITY PER INCH | 32 | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.424 INCHES MINIMUM AND | | 0.464 INCHES MAXIMUM | | FASTENER LENGTH | 0.872 INCHES MINIMUM AND | | 0.892 INCHES MAXIMUM | | MATERIAL | IRON ALLOY 660 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5732 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH | | HEAD STYLE | FILLISTER COUNTERSUNK | | HEAD DIAMETER | 0.264 INCHES MINIMUM AND | | 0.303 INCHES MAXIMUM | | HEAD HEIGHT | 0.012 INCHES MAXIMUM | | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND | | 101.0 DEGREES MAXIMUM | | INTERNAL DRIVE STYLE | HEXAGON | | WIDTH ACROSS FLATS | 0.1253 INCHES MINIMUM AND | | 0.1270 INCHES MAXIMUM | | GRIP LENGTH | 0.428 INCHES MINIMUM AND | | 0.448 INCHES MAXIMUM | | GRIP DIAMETER | 0.1890 INCHES MINIMUM AND | | 0.1895 INCHES MAXIMUM | | SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD | | 32.0 MICROINCHES GRIP | | 32.0 MICROINCHES THREADS | | SPECIAL FEATURES | CUT THREE EQUAL KEYWAYS,120 DEGREES |
|
|