|
|
|
National Stock Number:
5305-01-278-9639
Federal Supply Class:
5305
National Item Identification Number:
012789639
Description:
SCREW ASSEMBLY,PANEL
Detail:
A HEADED, THREADED FASTENING DEVICE OVER WHICH MAY BE ASSEMBLED; (1) A STAND-OFF; (2) A FLANGED BUSHING WITH WASHER(S) AND/OR A SHOULDERED BUSHING WITHOUT A FLANGE, OR IT MAY HAVE AN INTERNALLY THREADED SLEEVE THAT IS AN INTEGRAL PART OF THE SCREW; A WASHER AND AN EXTERNALLY THREAD SELF-LOCKING BUSHING THAT IS DRIVEN BY AN INSERTED DRIVER. ATTACHED TO PANEL BY THREADED BUSHING OR BY FLARING END OF STAND-OFF, OR BUSHING. USED IN CONJUNCTION WITH A SPEED NUT, NUT PLATE, OR DRIVEN INTO A THREADED HOLE IN THE ITEM THAT THE PANEL IS FASTENED TO. MAY BE SPRING LOADED.
|
Manufacturer Information:
| 115017-01 | 14345 | ROLM CORP MIL SPEC COMPUTERS | | FT1323-4-2-4 | 58794 | FASTENER TECHNOLOGY CORP |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNC | | NOMINAL THREAD DIAMETER | 0.112 INCHES | | THREAD QUANTITY PER INCH | 40 | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.141 INCHES MINIMUM AND | | 0.171 INCHES MAXIMUM | | FASTENER LENGTH | 0.578 INCHES NOMINAL | | MATERIAL | STEEL COMP 301 OR | | STEEL COMP 302B OR | | STEEL COMP 303 OR | | STEEL COMP 303SE OR | | STEEL COMP 304L OR | | STEEL COMP 308 OR | | STEEL COMP 309 OR | | STEEL COMP 310 OR | | STEEL COMP 310S OR | | STEEL COMP 321 OR | | STEEL COMP 384 OR | | STEEL COMP 385 SPRING | | STEEL COMP 301 OR | | STEEL COMP 302 OR | | STEEL COMP 304 OR | | STEEL COMP 305 OR | | STEEL COMP 309S OR | | STEEL COMP 314 OR | | STEEL COMP 316 OR | | STEEL COMP 316L OR | | STEEL COMP 317 OR | | STEEL COMP 347 OR | | STEEL COMP 348 OR | | STEEL COMP 385 STAND-OFF | | IRON ALLOY 660 FASTENER | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE FASTENER | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | MINIMUM TENSILE STRENGTH | 140000 POUNDS PER SQUARE INCH | | HEAD STYLE | FLAT CHAMFER | | HEAD DIAMETER | 0.190 INCHES MINIMUM AND | | 0.198 INCHES MAXIMUM | | HEAD HEIGHT | 0.112 INCHES NOMINAL | | INTERNAL DRIVE STYLE | HEXAGON | | WIDTH ACROSS FLATS | 0.094 INCHES NOMINAL |
|
|