|
|
|
National Stock Number:
5305-01-276-0867
Federal Supply Class:
5305
National Item Identification Number:
012760867
Description:
SCREW ASSEMBLY,PANEL
Detail:
A HEADED, THREADED FASTENING DEVICE OVER WHICH MAY BE ASSEMBLED; (1) A STAND-OFF; (2) A FLANGED BUSHING WITH WASHER(S) AND/OR A SHOULDERED BUSHING WITHOUT A FLANGE, OR IT MAY HAVE AN INTERNALLY THREADED SLEEVE THAT IS AN INTEGRAL PART OF THE SCREW; A WASHER AND AN EXTERNALLY THREAD SELF-LOCKING BUSHING THAT IS DRIVEN BY AN INSERTED DRIVER. ATTACHED TO PANEL BY THREADED BUSHING OR BY FLARING END OF STAND-OFF, OR BUSHING. USED IN CONJUNCTION WITH A SPEED NUT, NUT PLATE, OR DRIVEN INTO A THREADED HOLE IN THE ITEM THAT THE PANEL IS FASTENED TO. MAY BE SPRING LOADED.
|
Manufacturer Information:
| CA28080-08-10HS | 29372 | HOWMET GLOBAL FASTENING SYSTEMS INC. |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNC | | NOMINAL THREAD DIAMETER | 0.164 INCHES | | THREAD QUANTITY PER INCH | 32 | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.297 INCHES MINIMUM AND | | 0.327 INCHES MAXIMUM | | FASTENER LENGTH | 0.610 INCHES MINIMUM AND | | 0.640 INCHES MAXIMUM | | MATERIAL | STEEL COMP 302 SPRING | | STEEL COMP 303 PLUS X OR | | STEEL COMP 303SE OR | | STEEL COMP 303PB OR | | STEEL COMP 303MA STAND-OFF | | STEEL COMP 302 OR | | STEEL COMP 304 OR | | STEEL COMP 304L OR | | STEEL COMP 305 OR | | STEEL COMP 309 OR | | STEEL COMP 310 OR | | STEEL COMP 316 OR | | STEEL COMP 316L OR | | STEEL COMP 317 OR | | STEEL COMP 321 OR | | STEEL COMP 347 OR | | STEEL COMP 303 OR | | STEEL COMP 303SE FASTENER | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A580 ASSN STD ALL MATERIAL RESPONSES SPRING | | ASTM A581 ASSN STD ALL MATERIAL RESPONSES STAND-OFF | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | HEAD STYLE | KNURLED NO. 6 | | HEAD DIAMETER | 0.285 INCHES MINIMUM AND | | 0.315 INCHES MAXIMUM | | HEAD HEIGHT | 0.720 INCHES MINIMUM AND | | 0.780 INCHES MAXIMUM | | INTERNAL DRIVE STYLE | SLOT | | MATERIAL ACCOMMODATED THICKNESS | 0.283 INCHES MINIMUM AND | | 0.343 INCHES MAXIMUM | | SPECIAL FEATURES | DESIGNED TO BE USE WITH NUT RETAINER |
|
|