| THREAD SERIES DESIGNATOR | UNC |
| NOMINAL THREAD DIAMETER | 0.138 INCHES |
| THREAD QUANTITY PER INCH | 32 |
| THREAD CLASS | 2A |
| THREAD DIRECTION | RIGHT-HAND |
| FASTENER LENGTH | 0.853 INCHES MINIMUM AND |
| 0.893 INCHES MAXIMUM |
| MATERIAL | STEEL COMP 301 OR |
| STEEL COMP 302 OR |
| STEEL COMP 302B OR |
| STEEL COMP 303 OR |
| STEEL COMP 303SE OR |
| STEEL COMP 304 OR |
| STEEL COMP 304L OR |
| STEEL COMP 305 OR |
| STEEL COMP 308 OR |
| STEEL COMP 309 OR |
| STEEL COMP 309S OR |
| STEEL COMP 310 OR |
| STEEL COMP 310S OR |
| STEEL COMP 314 OR |
| STEEL COMP 316 OR |
| STEEL COMP 316L OR |
| STEEL COMP 317 OR |
| STEEL COMP 321 OR |
| STEEL COMP 347 OR |
| STEEL COMP 348 OR |
| STEEL COMP 384 OR |
| STEEL COMP 385 SECONDARY WASHER |
| STEEL COMP 301 PRIMARY WASHER |
| STEEL COMP 302 SPRING |
| ALUMINUM ALLOY 6061 STAND-OFF |
| IRON ALLOY 660 FASTENER |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE PRIMARY WASHER |
| QQ-W-423 FED SPEC SINGLE MATERIAL RESPONSE SPRING |
| QQ-A-225/8 FED SPEC SINGLE MATERIAL RESPONSE STAND-OFF |
| AMS 5731 ASSN STD SINGLE MATERIAL RESPONSE OR |
| AMS 5732 ASSN STD SINGLE MATERIAL RESPONSE OR |
| AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE FASTENER |
| SURFACE TREATMENT | PASSIVATE SECONDARY WASHER |
| PASSIVATE PRIMARY WASHER |
| PASSIVATE SPRING |
| ANODIZE STAND-OFF |
| PASSIVATE FASTENER |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE SECONDARY WASHER |
| QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE PRIMARY WASHER |
| QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE SPRING |
| MIL-A-8625 TY 1CL 1 MIL SPEC SINGLE TREATMENT RESPONSE STAND-OFF |
| QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE FASTENER |
| MINIMUM TENSILE STRENGTH | 80000 POUNDS PER SQUARE INCH |
| HEAD STYLE | FLAT CHAMFER |
| HEAD DIAMETER | 0.256 INCHES MINIMUM AND |
| 0.270 INCHES MAXIMUM |
| HEAD HEIGHT | 0.087 INCHES MINIMUM AND |
| 0.097 INCHES MAXIMUM |
| INTERNAL DRIVE STYLE | HEXAGON |
| WIDTH ACROSS FLATS | 0.109 INCHES MINIMUM AND |
| 0.111 INCHES MAXIMUM |
| MATERIAL ACCOMMODATED THICKNESS | 0.126 INCHES MINIMUM AND |
| 0.187 INCHES MAXIMUM |