|
|
|
National Stock Number:
5305-01-264-5898
Federal Supply Class:
5305
National Item Identification Number:
012645898
Description:
SCREW ASSEMBLY,PANEL
Detail:
A HEADED, THREADED FASTENING DEVICE OVER WHICH MAY BE ASSEMBLED; (1) A STAND-OFF; (2) A FLANGED BUSHING WITH WASHER(S) AND/OR A SHOULDERED BUSHING WITHOUT A FLANGE, OR IT MAY HAVE AN INTERNALLY THREADED SLEEVE THAT IS AN INTEGRAL PART OF THE SCREW; A WASHER AND AN EXTERNALLY THREAD SELF-LOCKING BUSHING THAT IS DRIVEN BY AN INSERTED DRIVER. ATTACHED TO PANEL BY THREADED BUSHING OR BY FLARING END OF STAND-OFF, OR BUSHING. USED IN CONJUNCTION WITH A SPEED NUT, NUT PLATE, OR DRIVEN INTO A THREADED HOLE IN THE ITEM THAT THE PANEL IS FASTENED TO. MAY BE SPRING LOADED.
|
Manufacturer Information:
| 11442039-1 | 18876 | U S ARMY AVIATION AND MISSILE COMMAND | | FCTA7900L-4-A-2 | 0HDW7 | HUCK INTERNATIONAL, INC. | | ST1072-4-1-2 | 58794 | FASTENER TECHNOLOGY CORP | | FCTA7900L-4-A-2 | 97928 | HUCK INTL INC |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNC | | NOMINAL THREAD DIAMETER | 0.112 INCHES | | THREAD QUANTITY PER INCH | 40 | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.187 INCHES MINIMUM AND | | 0.219 INCHES MAXIMUM | | FASTENER LENGTH | 0.395 INCHES MINIMUM AND | | 0.425 INCHES MAXIMUM | | MATERIAL | STEEL COMP 301 PRIMARY WASHER | | ALUMINUM ALLOY 6061 STAND-OFF | | STEEL COMP 303 FASTENER | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE PRIMARY WASHER | | QQ-A-225/8 FED SPEC SINGLE MATERIAL RESPONSE STAND-OFF | | ASTM A493 ASSN STD SINGLE MATERIAL RESPONSE FASTENER | | SURFACE TREATMENT | PASSIVATE PRIMARY WASHER | | ANODIZE STAND-OFF | | PASSIVATE FASTENER | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE PRIMARY WASHER | | MIL-A-8625 TY 1 CL 1 MIL SPEC SINGLE TREATMENT RESPONSE STAND-OFF | | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE FASTENER | | HEAD STYLE | PAN NO. 2 | | HEAD DIAMETER | 0.203 INCHES MINIMUM AND | | 0.235 INCHES MAXIMUM | | HEAD HEIGHT | 0.052 INCHES MINIMUM AND | | 0.084 INCHES MAXIMUM | | INTERNAL DRIVE STYLE | SLOT | | MATERIAL ACCOMMODATED THICKNESS | 0.031 INCHES MINIMUM AND | | 0.068 INCHES MAXIMUM |
|
|