|
|
|
National Stock Number:
5305-01-259-1189
Federal Supply Class:
5305
National Item Identification Number:
012591189
Description:
SCREW,CLOSE TOLERANCE
Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
|
Manufacturer Information:
| 10113602 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 125700A6-20 | 80539 | SPS TECHNOLOGIES, LLC | | HT271A6-20 | 73197 | HI-SHEAR CORPORATION |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNJF | | NOMINAL THREAD DIAMETER | 0.375 INCHES | | THREAD QUANTITY PER INCH | 24 | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.641 INCHES NOMINAL | | FASTENER LENGTH | 1.875 INCHES MINIMUM AND | | 1.922 INCHES MAXIMUM | | MATERIAL | TITANIUM ALLOY UNS R56400 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS4967 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH | | HEAD STYLE | FLAT COUNTERSUNK UNDERCUT | | HEAD DIAMETER | 0.7290 INCHES MINIMUM AND | | 0.7604 INCHES MAXIMUM | | HEAD HEIGHT | 0.1147 INCHES MINIMUM AND | | 0.1167 INCHES MAXIMUM | | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND | | 101.0 DEGREES MAXIMUM | | INTERNAL DRIVE STYLE | HIGH-TORQUE | | GRIP LENGTH | 1.240 INCHES MINIMUM AND | | 1.260 INCHES MAXIMUM | | GRIP DIAMETER | 0.3740 INCHES MINIMUM AND | | 0.3745 INCHES MAXIMUM | | FEATURES PROVIDED | O RING |
|
|