|
|
|
National Stock Number:
5305-01-251-2914
Federal Supply Class:
5305
National Item Identification Number:
012512914
Description:
SCREW,CAP,HEXAGON HEAD
Detail:
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. The threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. The thread length being the controlled dimension, the grip length is not specified. A locking feature may be incorporated in the design of the head or threads. Excludes BOLT, MACHINE; BOLT, EXTERNALLY RELIEVED BODY; BOLT, INTERNAL WRENCHING; and SCREW, CAP, SOCKET HEAD.
|
Manufacturer Information:
| MS51108-151 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNF | | THREAD LENGTH | 1.250 INCHES MINIMUM AND | | 1.750 INCHES MAXIMUM | | FASTENER LENGTH | 4.906 INCHES MINIMUM AND | | 5.000 INCHES MAXIMUM | | MATERIAL | STEEL COMP 1013 OR | | STEEL COMP 1015 OR | | STEEL COMP 1016 OR | | STEEL COMP 1017 OR | | STEEL COMP 1018 OR | | STEEL COMP 1019 OR | | STEEL COMP 1020 OR | | STEEL COMP 1021 OR | | STEEL COMP 1022 OR | | STEEL COMP 1023 OR | | STEEL COMP 1524 OR | | STEEL COMP 1025 OR | | STEEL COMP 1026 OR | | STEEL COMP 1527 OR | | STEEL COMP 1029 OR | | STEEL COMP 1030 OR | | STEEL COMP 1033 OR | | STEEL COMP 1034 OR | | STEEL COMP 1035 OR | | STEEL COMP 1037 OR | | STEEL COMP 1038 OR | | STEEL COMP 1039 OR | | STEEL COMP 1040 OR | | STEEL COMP 1541 OVERALL | | HEAD STYLE | HEXAGON | | THREAD DIRECTION | RIGHT-HAND | | NOMINAL THREAD DIAMETER | 0.625 INCHES | | THREAD QUANTITY PER INCH | 10 | | THREAD CLASS | 2A | | SURFACE TREATMENT | PHOSPHATE ZINC OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | DOD-P-16232 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 32.0 ROCKWELL C MINIMUM AND | | 38.0 ROCKWELL C MAXIMUM OVERALL | | MINIMUM TENSILE STRENGTH | 150000 POUNDS PER SQUARE INCH | | HEAD HEIGHT | 0.378 INCHES MINIMUM AND | | 0.403 INCHES MAXIMUM | | WIDTH BETWEEN FLATS | 0.922 INCHES MINIMUM AND | | 0.938 INCHES MAXIMUM | | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 4.718 INCHES MINIMUM AND | | 4.812 INCHES MAXIMUM FIRST HOLE | | SHANK UNTHREADED HOLE DIAMETER | 0.140 INCHES NOMINAL FIRST HOLE | | SPECIAL FEATURES | FINISH OVERALL | | SPEC/STD CONTROLLING DATA | | | MANUFACTURERS CODE | 96906 | | DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MS51108-151 |
|
|