5305-01-250-0630, SCREW,EXTERNALLY RELIEVED BODY

National Stock Number:
5305-01-250-0630

Federal Supply Class:
5305

National Item Identification Number:
012500630

Description:
SCREW,EXTERNALLY RELIEVED BODY

Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.

Manufacturer Information:

165-S-2

55566

MATTHEW WARREN, INC

Techincal Specification:

DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER	0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY	1
FASTENER LENGTH	0.860 INCHES MINIMUM AND 0.890 INCHES MAXIMUM
FIRST DIAMETER FROM HEAD	0.125 INCHES MINIMUM AND 0.135 INCHES MAXIMUM
HEAD DIAMETER	0.438 INCHES MINIMUM AND 0.453 INCHES MAXIMUM
HEAD HEIGHT	0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
HEAD STYLE	KNURLED NO. 1
INTERNAL DRIVE STYLE	SLOT
MATERIAL DOCUMENT AND CLASSIFICATION	ASTM A108 ASSN STD ALL MATERIAL RESPONSES OVERALL
MATERIAL	STEEL COMP 1008 OR STEEL COMP 1010 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 1021 OR STEEL COMP 1022 OR STEEL COMP 1025 OR STEEL COMP 1030 OR STEEL COMP 1035 OR STEEL COMP 1040 OR STEEL COMP 1045 OR STEEL COMP 1050 OR STEEL COMP 12L14 OR STEEL COMP 1095 OR STEEL COMP 1115 OR STEEL COMP 1117 OR STEEL COMP 1118 OR STEEL COMP 1137 OR STEEL COMP 1141 OR STEEL COMP 1144 OR STEEL COMP 1151 OR STEEL COMP 1211 OR STEEL COMP 1212 OR STEEL COMP 1213 OR STEEL COMP 1215 OR STEEL COMP 1330 OVERALL
NOMINAL THREAD DIAMETER	0.190 INCHES
POINT STYLE	CONE
SPECIAL FEATURES	FINISH CLEAR CHROMATE
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TYPE 2 CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	CADMIUM AND CHROMATE OVERALL
THREAD CLASS	2A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM
THREAD QUANTITY PER INCH	32
THREAD SERIES DESIGNATOR	UNF

Click here to Register for Free 30-day Trial