| THREAD SERIES DESIGNATOR | UNC |
| NOMINAL THREAD DIAMETER | 0.138 INCHES |
| THREAD QUANTITY PER INCH | 32 |
| THREAD CLASS | 2A |
| THREAD DIRECTION | RIGHT-HAND |
| FASTENER LENGTH | 0.942 INCHES MINIMUM AND |
| 0.982 INCHES MAXIMUM |
| MATERIAL | ALUMINUM ALLOY 6061 HEAD |
| STEEL COMP 301 SECONDARY WASHER |
| STEEL COMP 301 PRIMARY WASHER |
| STEEL COMP 302 OR |
| STEEL COMP 304 OR |
| STEEL COMP 305 OR |
| STEEL COMP 316 OR |
| STEEL COMP 321 OR |
| STEEL COMP 347 SPRING |
| STEEL COMP 304 STAND-OFF |
| STEEL COMP 303 FASTENER |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-22518 FED SPEC SINGLE MATERIAL RESPONSE HEAD |
| MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE SECONDARY WASHER |
| MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE PRIMARY WASHER |
| ASTM A580 ASSN STD ALL MATERIAL RESPONSES SPRING |
| QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE STAND-OFF |
| ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE FASTENER |
| SURFACE TREATMENT | ANODIZE HEAD |
| PASSIVATE SECONDARY WASHER |
| PASSIVATE PRIMARY WASHER |
| PASSIVATE SPRING |
| PASSIVATE STAND-OFF |
| PASSIVATE FASTENER |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625 TYPE 1 CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE HEAD |
| QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE SECONDARY WASHER |
| QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE PRIMARY WASHER |
| QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE SPRING |
| QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE STAND-OFF |
| QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE FASTENER |
| HEAD STYLE | FLAT CHAMFER |
| HEAD DIAMETER | 0.356 INCHES NOMINAL |
| HEAD HEIGHT | 0.385 INCHES NOMINAL |
| INTERNAL DRIVE STYLE | SLOT |
| MATERIAL ACCOMMODATED THICKNESS | 0.032 INCHES MINIMUM AND |
| 0.093 INCHES MAXIMUM |
| SPECIAL FEATURES | SUPPLY WITH SPRING WASHER,CARBON STEEL PER AISI 1050,WAVE SHAPED,2 REQUIRED,FINISH CADMIUM PER QQ-P-416,TYPE 2 CLASS 2 |