|
|
|
National Stock Number:
5305-01-247-9083
Federal Supply Class:
5305
National Item Identification Number:
012479083
Description:
SCREW ASSEMBLY,PANEL
Detail:
A HEADED, THREADED FASTENING DEVICE OVER WHICH MAY BE ASSEMBLED; (1) A STAND-OFF; (2) A FLANGED BUSHING WITH WASHER(S) AND/OR A SHOULDERED BUSHING WITHOUT A FLANGE, OR IT MAY HAVE AN INTERNALLY THREADED SLEEVE THAT IS AN INTEGRAL PART OF THE SCREW; A WASHER AND AN EXTERNALLY THREAD SELF-LOCKING BUSHING THAT IS DRIVEN BY AN INSERTED DRIVER. ATTACHED TO PANEL BY THREADED BUSHING OR BY FLARING END OF STAND-OFF, OR BUSHING. USED IN CONJUNCTION WITH A SPEED NUT, NUT PLATE, OR DRIVEN INTO A THREADED HOLE IN THE ITEM THAT THE PANEL IS FASTENED TO. MAY BE SPRING LOADED.
|
Manufacturer Information:
| CS7018-8-10-B | 58998 | FASTENER INNOVATION TECHNOLOGY, INC. | | DJE7900L-8-B-10 | 17446 | HUCK INTERNATIONAL, INC | | H910090-58C | 82577 | RAYTHEON COMPANY | | DJE7900L-8-B-10 | 97928 | HUCK INTL INC |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNC | | NOMINAL THREAD DIAMETER | 0.164 INCHES | | THREAD QUANTITY PER INCH | 32 | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | FASTENER LENGTH | 0.610 INCHES MINIMUM AND | | 0.640 INCHES MAXIMUM | | MATERIAL | STEEL COMP 304 STAND-OFF | | IRON ALLOY 660 FASTENER | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-23195 MIL SPEC SINGLE MATERIAL RESPONSE OR | | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OR | | AMS 5639 ASSN STD SINGLE MATERIAL RESPONSE OR | | STM A493 ASSN STD SINGLE MATERIAL RESPONSE STAND-OFF | | AMS 5732 ASSN STD SINGLE MATERIAL RESPONSE OR | | AMS 5736 ASSN STD SINGLE MATERIAL RESPONSE OR | | AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE FASTENER | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | HEAD STYLE | FLAT CHAMFER | | HEAD DIAMETER | 0.335 INCHES MINIMUM AND | | 0.365 INCHES MAXIMUM | | HEAD HEIGHT | 0.284 INCHES MAXIMUM | | INTERNAL DRIVE STYLE | HEXAGON | | WIDTH ACROSS FLATS | 0.140 INCHES MINIMUM AND | | 0.142 INCHES MAXIMUM | | MATERIAL ACCOMMODATED THICKNESS | 0.063 INCHES MINIMUM AND | | 0.125 INCHES MAXIMUM |
|
|