5305-01-237-9315, SCREW ASSEMBLY,PANEL

4320-01-237-9314 SEAL ASSEMBLY,SHAFT,SPRING LOADE

National Stock Number:
5305-01-237-9315

Federal Supply Class:
5305

National Item Identification Number:
012379315

Description:
SCREW ASSEMBLY,PANEL

Detail:
A HEADED, THREADED FASTENING DEVICE OVER WHICH MAY BE ASSEMBLED; (1) A STAND-OFF; (2) A FLANGED BUSHING WITH WASHER(S) AND/OR A SHOULDERED BUSHING WITHOUT A FLANGE, OR IT MAY HAVE AN INTERNALLY THREADED SLEEVE THAT IS AN INTEGRAL PART OF THE SCREW; A WASHER AND AN EXTERNALLY THREAD SELF-LOCKING BUSHING THAT IS DRIVEN BY AN INSERTED DRIVER. ATTACHED TO PANEL BY THREADED BUSHING OR BY FLARING END OF STAND-OFF, OR BUSHING. USED IN CONJUNCTION WITH A SPEED NUT, NUT PLATE, OR DRIVEN INTO A THREADED HOLE IN THE ITEM THAT THE PANEL IS FASTENED TO. MAY BE SPRING LOADED.

Manufacturer Information:

DPYS7900-4-A-2	0HDW7	HUCK INTERNATIONAL, INC.
DPYS7900-4-A-2	17446	HUCK INTERNATIONAL, INC
DPYS7900-4-A-2	97928	HUCK INTL INC

Techincal Specification:

COUNTERSINK ANGLE	99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH	0.395 INCHES MINIMUM AND 0.395 INCHES MINIMUM AND 0.425 INCHES MAXIMUM0.425 INCHES MAXIMUM
HARDNESS RATING	34.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER	0.231 INCHES MINIMUM AND 0.231 INCHES MINIMUM AND 0.323 INCHES MAXIMUM0.323 INCHES MAXIMUM
HEAD STYLE	FLAT COUNTERSUNK
INTERNAL DRIVE STYLE	SLOT
MATERIAL ACCOMMODATED THICKNESS	0.115 INCHES MINIMUM AND 0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM0.125 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 6300 ASSN STD SINGLE MATERIAL RESPONSE FASTENER
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-B-626 FED SPEC SINGLE MATERIAL RESPONSE STAND-OFF
MATERIAL	COPPER ALLOY 360 STAND-OFF
MATERIAL	STEEL COMP 4037 FASTENER
NOMINAL THREAD DIAMETER	0.112 INCHES0.112 INCHES
PART NAME ASSIGNED BY CONTROLLING AGENCY	NAVY SPECIAL PROJECT
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416 TY 1 CL 2 FED SPEC SINGLE TREATMENT RESPONSE FASTENER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416 TY 1 CL 2 FED SPEC SINGLE TREATMENT RESPONSE STAND-OFF
SURFACE TREATMENT	CADMIUM FASTENER
SURFACE TREATMENT	CADMIUM STAND-OFF
THREAD LENGTH	0.175 INCHES NOMINAL
THREAD CLASS	2A2A
THREAD DIRECTION	RIGHT-HAND
THREAD QUANTITY PER INCH	4040
THREAD SERIES DESIGNATOR	UNIFIED NATIONAL COARSE (UNC)

Click here to Register for Free 30-day Trial