|
|
|
National Stock Number:
5305-01-218-4540
Federal Supply Class:
5305
National Item Identification Number:
012184540
Description:
SETSCREW
Detail:
An externally threaded device whose threaded portion is of one nominal diameter with or without a head and having a cup, cone, or other type of machined point designed to prevent or restrict relative movement of parts and designed to be driven with either a wrench or inserted driver. A locking feature may be incorporated in the design of the head or threads.
|
Manufacturer Information:
| C9734-06-4-7 | 58794 | FASTENER TECHNOLOGY CORP | | C9734-06-4-7 | 80539 | SPS TECHNOLOGIES, LLC | | CA21063-06-4-7 | 29372 | HOWMET GLOBAL FASTENING SYSTEMS INC. | | C9734-06-4-7 | 81755 | LOCKHEED MARTIN CORPORATION |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNC | | NOMINAL THREAD DIAMETER | 0.138 INCHES | | THREAD QUANTITY PER INCH | 32 | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | FASTENER LENGTH | 0.428 INCHES MINIMUM AND | | 0.448 INCHES MAXIMUM | | MATERIAL | STEEL COMP 301 OR | | STEEL COMP 302 OR | | STEEL COMP 302B OR | | STEEL COMP 304 OR | | STEEL COMP 304L OR | | STEEL COMP 305 OR | | STEEL COMP 308 OR | | STEEL COMP 309 OR | | STEEL COMP 309S OR | | STEEL COMP 310 OR | | STEEL COMP 310S OR | | STEEL COMP 314 OR | | STEEL COMP 316 OR | | STEEL COMP 316L OR | | STEEL COMP 317 OR | | STEEL COMP 321 OR | | STEEL COMP 347 OR | | STEEL COMP 348 OR | | STEEL COMP 384 OR | | STEEL COMP 385 OR | | STEEL COMP 303 PLUS X OR | | STEEL COMP 303CU OR | | STEEL COMP 303MA OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC ALL MATERIAL RESPONSES OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | HEAD STYLE | FLAT COUNTERSUNK | | HEAD DIAMETER | 0.231 INCHES MINIMUM AND | | 0.241 INCHES MAXIMUM | | COUNTERSINK ANGLE | 98.0 DEGREES MINIMUM AND | | 102.0 DEGREES MAXIMUM | | INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 | | POINT STYLE | FLAT | | POINT LENGTH | 0.100 INCHES MAXIMUM | | POINT DIAMETER | 0.090 INCHES MINIMUM AND | | 0.095 INCHES MAXIMUM | | POINT CHAMFER ANGLE | 45.0 DEGREES NOMINAL | | SPECIAL FEATURES | TWO KEYWAYS 180 DEG APART |
|