|
|
|
National Stock Number:
5305-01-217-5177
Federal Supply Class:
5305
National Item Identification Number:
012175177
Description:
SCREW ASSEMBLY,PANEL
Detail:
A HEADED, THREADED FASTENING DEVICE OVER WHICH MAY BE ASSEMBLED; (1) A STAND-OFF; (2) A FLANGED BUSHING WITH WASHER(S) AND/OR A SHOULDERED BUSHING WITHOUT A FLANGE, OR IT MAY HAVE AN INTERNALLY THREADED SLEEVE THAT IS AN INTEGRAL PART OF THE SCREW; A WASHER AND AN EXTERNALLY THREAD SELF-LOCKING BUSHING THAT IS DRIVEN BY AN INSERTED DRIVER. ATTACHED TO PANEL BY THREADED BUSHING OR BY FLARING END OF STAND-OFF, OR BUSHING. USED IN CONJUNCTION WITH A SPEED NUT, NUT PLATE, OR DRIVEN INTO A THREADED HOLE IN THE ITEM THAT THE PANEL IS FASTENED TO. MAY BE SPRING LOADED.
|
Manufacturer Information:
| B4012826-1 | 56996 | DEPARTMENT OF THE ARMY HQ UNITED STATES ARMY COMMUNICATIONS RESEARCH AND DEVELOPMENT COMMAND | | FT1249-801 | 58794 | FASTENER TECHNOLOGY CORP | | SDL7900-10C-D-3. | 0HDW7 | HUCK INTERNATIONAL, INC. | | SDL7900-10C-D-3.5 | 0HDW7 | HUCK INTERNATIONAL, INC. | | T320-014-801 | 36090 | LOCKHEED MARTIN LIBRASCOPE CORP | | SDL7900-10C-D-3.5 | 97928 | HUCK INTL INC |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNC | | NOMINAL THREAD DIAMETER | 0.190 INCHES | | THREAD QUANTITY PER INCH | 24 | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.233 INCHES NOMINAL | | FASTENER LENGTH | 1.000 INCHES NOMINAL | | MATERIAL | STEEL COMP 301 OR | | STEEL COMP 302 OR | | STEEL COMP 303 OR | | STEEL COMP 302B OR | | STEEL COMP 303SE OR | | STEEL COMP 304 OR | | STEEL COMP 304L OR | | STEEL COMP 305 OR | | STEEL COMP 308 OR | | STEEL COMP 309 OR | | STEEL COMP 309S OR | | STEEL COMP 310 OR | | STEEL COMP 310S OR | | STEEL COMP 314 OR | | STEEL COMP 316 OR | | STEEL COMP 316L OR | | STEEL COMP 317 OR | | STEEL COMP 321 OR | | STEEL COMP 347 OR | | STEEL COMP 348 OR | | STEEL COMP 384 OR | | STEEL COMP 385 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE PRIMARY WASHER | | QQ-W-423 FORM 1 FED SPEC SINGLE MATERIAL RESPONSE SPRING | | QQ-A-225/8 FED SPEC SINGLE MATERIAL RESPONSE STAND-OFF | | ASTM A-493 ASSN STD ALL MATERIAL RESPONSES FASTENER | | SURFACE TREATMENT | PASSIVATE SECONDARY WASHER | | PASSIVATE PRIMARY WASHER | | PASSIVATE SPRING | | ANODIZE STAND-OFF | | PASSIVATE FASTENER | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE SECONDARY WASHER | | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE PRIMARY WASHER | | QQ -P-35 FED SPEC SINGLE TREATMENT RESPONSE SPRING | | MIL-A-8625,TYPE1,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE STAND-OFF | | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE FASTENER | | HEAD STYLE | HEXAGON | | HEAD HEIGHT | 0.105 INCHES MINIMUM AND | | 0.120 INCHES MAXIMUM | | WIDTH BETWEEN FLATS | 0.367 INCHES MINIMUM AND | | 0.375 INCHES MAXIMUM | | INTERNAL DRIVE STYLE | SLOT | | MATERIAL ACCOMMODATED THICKNESS | 0.188 INCHES MINIMUM AND | | 0.250 INCHES MAXIMUM |
|
|