|
|
|
National Stock Number:
5305-01-209-9381
Federal Supply Class:
5305
National Item Identification Number:
012099381
Description:
SCREW ASSEMBLY,PANEL
Detail:
A HEADED, THREADED FASTENING DEVICE OVER WHICH MAY BE ASSEMBLED; (1) A STAND-OFF; (2) A FLANGED BUSHING WITH WASHER(S) AND/OR A SHOULDERED BUSHING WITHOUT A FLANGE, OR IT MAY HAVE AN INTERNALLY THREADED SLEEVE THAT IS AN INTEGRAL PART OF THE SCREW; A WASHER AND AN EXTERNALLY THREAD SELF-LOCKING BUSHING THAT IS DRIVEN BY AN INSERTED DRIVER. ATTACHED TO PANEL BY THREADED BUSHING OR BY FLARING END OF STAND-OFF, OR BUSHING. USED IN CONJUNCTION WITH A SPEED NUT, NUT PLATE, OR DRIVEN INTO A THREADED HOLE IN THE ITEM THAT THE PANEL IS FASTENED TO. MAY BE SPRING LOADED.
|
Manufacturer Information:
| 514-146 ITEM 15 | 62767 | ODETICS INC PRECISION TIME DIV | | DCT7900-8-B-5 | 08524 | DEUTSCH FASTENER CORP | | DCT7900-8-B-5 | 0HDW7 | HUCK INTERNATIONAL, INC. | | DCT7900-8-B-5 | 17446 | HUCK INTERNATIONAL, INC | | DCT7900-8-B-5 | 97928 | HUCK INTL INC |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNC | | NOMINAL THREAD DIAMETER | 0.164 INCHES | | THREAD QUANTITY PER INCH | 32 | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.235 INCHES MINIMUM AND | | 0.265 INCHES MAXIMUM | | FASTENER LENGTH | 0.770 INCHES MINIMUM AND | | 0.800 INCHES MAXIMUM | | MATERIAL | ALUMINUM ALLOY 6061 STAND-OFF | | STEEL COMP 302 OR | | STEEL COMP 304 OR | | STEEL COMP 305 OR | | STEEL COMP 316 OR | | STEEL COMP 384 FASTENER | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/8 FED SPEC SINGLE MATERIAL RESPONSE STAND-OFF | | ASTM-A-493 ASSN STD ALL MATERIAL RESPONSES FASTENER | | SURFACE TREATMENT | ANODIZE STAND-OFF | | PASSIVATE FASTENER | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625 TY 1 CL 1 MIL SPEC SINGLE TREATMENT RESPONSE STAND-OFF | | QQ-P-35 MIL STD SINGLE TREATMENT RESPONSE FASTENER | | HEAD STYLE | PAN NO. 2 | | HEAD DIAMETER | 0.314 INCHES NOMINAL | | HEAD HEIGHT | 0.091 INCHES NOMINAL | | INTERNAL DRIVE STYLE | SLOT | | MATERIAL ACCOMMODATED THICKNESS | 0.063 INCHES MINIMUM AND | | 0.125 INCHES MAXIMUM |
|
|