5305-01-197-5931, SCREW,CLOSE TOLERANCE

National Stock Number:
5305-01-197-5931

Federal Supply Class:
5305

National Item Identification Number:
011975931

Description:
SCREW,CLOSE TOLERANCE

Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.

Manufacturer Information:

MS21130B511	80205	NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE
MS21130B511	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

THREAD SERIES DESIGNATOR	UNJF
NOMINAL THREAD DIAMETER	0.312 INCHES
THREAD QUANTITY PER INCH	24
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.305 INCHES MINIMUM AND
	0.356 INCHES MAXIMUM
FASTENER LENGTH	1.165 INCHES MINIMUM AND
	1.185 INCHES MAXIMUM
MATERIAL	STEEL COMP 631 OR
	STEEL COMP 302 SPRING
	STEEL COMP 632 FASTENER
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE FASTENER
SURFACE TREATMENT	PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
HARDNESS RATING	43.0 ROCKWELL C MINIMUM AND
	47.0 ROCKWELL C MAXIMUM FASTENER
MINIMUM TENSILE STRENGTH	63000 POUNDS PER SQUARE INCH
HEAD STYLE	FLAT COUNTERSUNK
HEAD DIAMETER	0.577 INCHES MINIMUM AND
	0.635 INCHES MAXIMUM
COUNTERSINK ANGLE	99.0 DEGREES MINIMUM AND
	101.0 DEGREES MAXIMUM
INTERNAL DRIVE STYLE	HIGH-TORQUE
LOCKING FEATURE	DETENT BALL GRIP
GRIP LENGTH	0.688 INCHES MINIMUM AND
	0.704 INCHES MAXIMUM
GRIP DIAMETER	0.3112 INCHES MINIMUM AND
	0.3117 INCHES MAXIMUM
SURFACE FINISH	32.0 MICROINCHES BEARING SURFACE OF HEAD
	32.0 MICROINCHES GRIP
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	1.053 INCHES MINIMUM AND
	1.073 INCHES MAXIMUM FIRST HOLE
SHANK UNTHREADED HOLE DIAMETER	0.076 INCHES MINIMUM AND
	0.086 INCHES MAXIMUM FIRST HOLE
PART NAME ASSIGNED BY CONTROLLING AGENCY	NAVY SPECIAL PROJECT

Click here to Register for Free 30-day Trial