5305-01-196-5535, SCREW ASSEMBLY,PANEL

National Stock Number:
5305-01-196-5535

Federal Supply Class:
5305

National Item Identification Number:
011965535

Description:
SCREW ASSEMBLY,PANEL

Detail:
A HEADED, THREADED FASTENING DEVICE OVER WHICH MAY BE ASSEMBLED; (1) A STAND-OFF; (2) A FLANGED BUSHING WITH WASHER(S) AND/OR A SHOULDERED BUSHING WITHOUT A FLANGE, OR IT MAY HAVE AN INTERNALLY THREADED SLEEVE THAT IS AN INTEGRAL PART OF THE SCREW; A WASHER AND AN EXTERNALLY THREAD SELF-LOCKING BUSHING THAT IS DRIVEN BY AN INSERTED DRIVER. ATTACHED TO PANEL BY THREADED BUSHING OR BY FLARING END OF STAND-OFF, OR BUSHING. USED IN CONJUNCTION WITH A SPEED NUT, NUT PLATE, OR DRIVEN INTO A THREADED HOLE IN THE ITEM THAT THE PANEL IS FASTENED TO. MAY BE SPRING LOADED.

Manufacturer Information:

DENN7900P-10F-B-3	0HDW7	HUCK INTERNATIONAL, INC.
DENN7900P-10F-B-3	97928	HUCK INTL INC
DENN7900P-10F-B-A	20418	DRS SUSTAINMENT SYSTEMS, INC. USE CAGE CODE 98255 FOR CATALOGING
ES8397-340	20418	DRS SUSTAINMENT SYSTEMS, INC. USE CAGE CODE 98255 FOR CATALOGING
DENN7900P-10F-B-A	98255	DRS SUSTAINMENT SYSTEMS INC

Techincal Specification:

COUNTERSINK ANGLE	89.0 DEGREES MINIMUM AND 91.0 DEGREES MAXIMUM
FASTENER LENGTH	0.525 INCHES MINIMUM AND 0.545 INCHES MAXIMUM
HEAD DIAMETER	0.469 INCHES MINIMUM AND 0.479 INCHES MAXIMUM
HEAD HEIGHT	0.180 INCHES NOMINAL
HEAD STYLE	FLAT COUNTERSUNK UNDERCUT
INTERNAL DRIVE STYLE	CROSS RECESS TYPE 1
MATERIAL ACCOMMODATED THICKNESS	0.090 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5731 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5734 ASSN STD SINGLE MATERIAL RESPONSE FASTENER
MATERIAL DOCUMENT AND CLASSIFICATION	ASTM A580 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM A313 ASSN STD SINGLE MATERIAL RESPONSE SPRING
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE STAND-OFF
MATERIAL	IRON ALLOY 660 FASTENER
MATERIAL	STEEL COMP 302 SPRING
MATERIAL	STEEL COMP 304 STAND-OFF
MINIMUM TENSILE STRENGTH	140000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.190 INCHES
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	PASSIVATE OVERALL
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.203 INCHES NOMINAL
THREAD SERIES DESIGNATOR	UNF
THREAD QUANTITY PER INCH	32

Click here to Register for Free 30-day Trial