5305-01-194-6443, SCREW,CLOSE TOLERANCE

National Stock Number:
5305-01-194-6443

Federal Supply Class:
5305

National Item Identification Number:
011946443

Description:
SCREW,CLOSE TOLERANCE

Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.

Manufacturer Information:

122966C4-8D	80539	SPS TECHNOLOGIES, LLC
GB511DU4C8D	26512	NORTHROP GRUMMAN SYSTEMS CORPORATION
PBF1355C4-8D	27624	SPS TECHNOLOGIES LLC
MATP111CD4-8	58845	ABOUNDING SECURITY INC DIV OF MAA CORP
HR2174C4-8D	73197	HI-SHEAR CORPORATION
HR2174C4-8D	L4528	LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INC
SC2174C4-8D	06950	HOWMET GLOBAL FASTENING SYSTEMS INC

Techincal Specification:

THREAD SERIES DESIGNATOR	UNJF
NOMINAL THREAD DIAMETER	0.250 INCHES
THREAD QUANTITY PER INCH	28
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.378 INCHES MINIMUM AND
	0.428 INCHES MAXIMUM
FASTENER LENGTH	0.888 INCHES MINIMUM AND
	0.918 INCHES MAXIMUM
MATERIAL	IRON ALLOY 660 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION	AMS5731 ASSN STD SINGLE MATERIAL RESPONSE OR
	AMS5732 ASSN STD SINGLE MATERIAL RESPONSE OR
	AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
SURFACE TREATMENT	PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
MINIMUM TENSILE STRENGTH	160000 POUNDS PER SQUARE INCH
HEAD STYLE	PAN NO. 2
HEAD DIAMETER	0.477 INCHES MINIMUM AND
	0.492 INCHES MAXIMUM
HEAD HEIGHT	0.140 INCHES MINIMUM AND
	0.150 INCHES MAXIMUM
INTERNAL DRIVE STYLE	OFFSET CRUCIFORM (TORQUE SET)
GRIP LENGTH	0.490 INCHES MINIMUM AND
	0.510 INCHES MAXIMUM
GRIP DIAMETER	0.2490 INCHES MINIMUM AND
	0.2495 INCHES MAXIMUM
SURFACE FINISH	32.0 MICROINCHES BEARING SURFACE OF HEAD
	32.0 MICROINCHES GRIP
	32.0 MICROINCHES THREADS
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	0.782 INCHES MINIMUM AND
	0.792 INCHES MAXIMUM FIRST HOLE
SHANK UNTHREADED HOLE DIAMETER	0.076 INCHES MINIMUM AND
	0.086 INCHES MAXIMUM FIRST HOLE

Click here to Register for Free 30-day Trial