5305-01-191-3120, SCREW,CAP,HEXAGON HEAD

National Stock Number:
5305-01-191-3120

Federal Supply Class:
5305

National Item Identification Number:
011913120

Description:
SCREW,CAP,HEXAGON HEAD

Detail:
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. The threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. The thread length being the controlled dimension, the grip length is not specified. A locking feature may be incorporated in the design of the head or threads. Excludes BOLT, MACHINE; BOLT, EXTERNALLY RELIEVED BODY; BOLT, INTERNAL WRENCHING; and SCREW, CAP, SOCKET HEAD.

Manufacturer Information:

FF-S-85	81348	FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
MS51109-60	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	0.813 INCHES MINIMUM FIRST HOLE AND 0.844 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH	0.969 INCHES MINIMUM AND 1.000 INCHES MAXIMUM
HARDNESS RATING	235.0 BRINELL STANDARD MAXIMUM OVERALL
HEAD HEIGHT	0.226 INCHES MINIMUM AND 0.243 INCHES MAXIMUM
HEAD STYLE	HEXAGON
NOMINAL THREAD DIAMETER	0.375 INCHES
NONDEFINITIVE SPEC/STD DATA	2 TYPE AND 10P STYLE
MATERIAL DOCUMENT AND CLASSIFICATION	66 FED STD ALL MATERIAL RESPONSES OVERALL
MATERIAL	STEEL COMP 410 OVERALL OR STEEL COMP 416 OVERALL OR STEEL COMP 430 OVERALL
MINIMUM TENSILE STRENGTH	70000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH	40000 POUNDS PER SQUARE INCH
SHANK UNTHREADED HOLE DIAMETER	0.105 INCHES MINIMUM FIRST HOLE AND 0.113 INCHES MAXIMUM FIRST HOLE
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.813 INCHES MINIMUM AND 1.000 INCHES MAXIMUM
THREAD QUANTITY PER INCH	16
THREAD SERIES DESIGNATOR	UNC
WIDTH BETWEEN FLATS	0.551 INCHES MINIMUM AND 0.562 INCHES MAXIMUM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	PASSIVATE OVERALL

Click here to Register for Free 30-day Trial