|
|
|
National Stock Number:
5305-01-190-7555
Federal Supply Class:
5305
National Item Identification Number:
011907555
Description:
SCREW,CLOSE TOLERANCE
Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
|
Manufacturer Information:
| AS292-4-23 | 84256 | AVIBANK MFG., INC. | | GB10CG4-23 | 06950 | HOWMET GLOBAL FASTENING SYSTEMS INC | | GB10CG4-23 | 27624 | SPS TECHNOLOGIES LLC | | GB10CG4-23 | 58845 | ABOUNDING SECURITY INC DIV OF MAA CORP | | GB10CG4-23 | 73197 | HI-SHEAR CORPORATION | | GB10CG4-23 | 80539 | SPS TECHNOLOGIES, LLC | | GB510CG4-23 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | GB10CG4-23 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC | | GB10CG4-23 | L4528 | LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INC |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNJF | | NOMINAL THREAD DIAMETER | 0.250 INCHES | | THREAD QUANTITY PER INCH | 28 | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.402 INCHES MINIMUM AND | | 0.438 INCHES MAXIMUM | | FASTENER LENGTH | 1.856 INCHES MINIMUM AND | | 1.876 INCHES MAXIMUM | | MATERIAL | STEEL COMP XM-13 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS5629 ASSN STD SINGLE MATERIAL RESPONSE HEAD | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 47.0 ROCKWELL C MAXIMUM AND | | 43.0 ROCKWELL C MINIMUM OVERALL | | MINIMUM TENSILE STRENGTH | 63000 POUNDS PER SQUARE INCH | | HEAD STYLE | FLAT COUNTERSUNK | | HEAD DIAMETER | 0.449 INCHES MINIMUM AND | | 0.507 INCHES MAXIMUM | | COUNTERSINK ANGLE | 101.0 DEGREES MAXIMUM AND | | 99.0 DEGREES MINIMUM | | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) | | LOCKING FEATURE | DETENT BALL THREADS | | GRIP LENGTH | 1.438 INCHES MINIMUM AND | | 1.454 INCHES MAXIMUM | | GRIP DIAMETER | 0.2487 INCHES MINIMUM AND | | 0.2492 INCHES MAXIMUM | | SURFACE FINISH | 32.0 MICROINCHES GRIP | | 32.0 MICROINCHES THREADS | | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 1.771 INCHES MINIMUM AND | | 1.787 INCHES MAXIMUM FIRST HOLE | | SHANK UNTHREADED HOLE DIAMETER | 0.076 INCHES MINIMUM AND | | 0.086 INCHES MAXIMUM FIRST HOLE | | SPECIAL FEATURES | INTERNAL DRIVE RIBBED | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SCREW,CLOSE TOLERANCE |
|
|