5905-01-187-3467 RESISTOR,FIXED,WIRE WOUND,INDUCTIVE Index 5305-01-187-3470 SCREW,MACHINE

National Stock Number:
5305-01-187-3468

Federal Supply Class:
5305

National Item Identification Number:
011873468

Description:
SCREW,EXTERNALLY RELIEVED BODY

Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.


Manufacturer Information:
0098-LL-TJ2-280353711NAVAL SEA SYSTEMS COMMAND
519063953711NAVAL SEA SYSTEMS COMMAND


Techincal Specification:
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER0.629 INCHES MINIMUM AND 0.720 INCHES MAXIMUM
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY1
FASTENER LENGTH0.969 INCHES MINIMUM AND 1.000 INCHES MAXIMUM
FIRST DIAMETER FROM HEAD0.130 INCHES MINIMUM AND 0.140 INCHES MAXIMUM
HARDNESS RATING38.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER0.3030 INCHES MINIMUM AND 0.3125 INCHES MAXIMUM
HEAD HEIGHT0.185 INCHES MINIMUM AND 0.190 INCHES MAXIMUM
HEAD STYLEFLAT CHAMFER
INTERNAL DRIVE STYLEHEXAGON
MATERIALSTEEL OVERALL
MINIMUM TENSILE STRENGTH180000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER0.190 INCHES
POINT STYLEFLAT
WIDTH ACROSS FLATS0.1562 INCHES MINIMUM AND 0.1587 INCHES MAXIMUM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416 TYPE 2 CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
THREAD CLASS2A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.280 INCHES MINIMUM AND 0.340 INCHES MAXIMUM
THREAD SERIES DESIGNATORUNF
THREAD QUANTITY PER INCH32


Click here to Register for Free 30-day Trial

© 2026 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us