5305-01-185-8422, SCREW,EXTERNALLY RELIEVED BODY

5935-01-185-8421 CONNECTOR ASSEMBLY,ELECTRICAL

National Stock Number:
5305-01-185-8422

Federal Supply Class:
5305

National Item Identification Number:
011858422

Description:
SCREW,EXTERNALLY RELIEVED BODY

Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.

Manufacturer Information:

6930876-1

03640

LOCKHEED MARTIN CORPORATION

Techincal Specification:

DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER	0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY	1
FASTENER LENGTH	0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM
FIRST DIAMETER FROM HEAD	0.095 INCHES MINIMUM AND 0.098 INCHES MAXIMUM
HARDNESS RATING	80.0 ROCKWELL C MINIMUM OVERALL
HEAD DIAMETER	0.221 INCHES MINIMUM AND 0.231 INCHES MAXIMUM
HEAD HEIGHT	0.133 INCHES MINIMUM AND 0.143 INCHES MAXIMUM
HEAD STYLE	FLAT CHAMFER
INTERNAL DRIVE STYLE	HEXAGON
MATERIAL DOCUMENT AND CLASSIFICATION	66 FED STD ALL MATERIAL RESPONSES OVERALL
MATERIAL	STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OVERALL
MINIMUM TENSILE STRENGTH	80000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.138 INCHES
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	PASSIVATE OVERALL
THREAD LENGTH	0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD SERIES DESIGNATOR	UNIFIED NATIONAL COARSE (UNC)
THREAD QUANTITY PER INCH	32
WIDTH ACROSS FLATS	0.105 INCHES MINIMUM AND 0.115 INCHES MAXIMUM

Click here to Register for Free 30-day Trial