|
|
|
National Stock Number:
5305-01-183-5863
Federal Supply Class:
5305
National Item Identification Number:
011835863
Description:
SCREW,CLOSE TOLERANCE
Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
|
Manufacturer Information:
| BACB30LU3D10 | 06710 | VALLEY-TODECO, INC. | | BACB30LU3D10 | 06725 | SPS TECHNOLOGIES, LLC | | BACB30LU3D10 | 06950 | HOWMET GLOBAL FASTENING SYSTEMS INC | | BACB30LU3D10 | 17446 | HUCK INTERNATIONAL, INC | | BACB30LU3D10 | 17943 | FEDERAL MANUFACTURING CORP | | BACB30LU3D10 | 27624 | SPS TECHNOLOGIES LLC | | BACB30LU3D10 | 56878 | SPS TECHNOLOGIES, LLC | | BACB30LU3D10 | 57928 | SONIC INDUSTRIES, INC. | | BACB30LU3D10 | 80539 | SPS TECHNOLOGIES, LLC | | BACB30LU3D10 | 81205 | THE BOEING COMPANY | | BACB30LU3D10 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC | | BACB30LU3D10 | 97928 | HUCK INTL INC |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNJF | | NOMINAL THREAD DIAMETER | 0.190 INCHES | | THREAD QUANTITY PER INCH | 32 | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.320 INCHES MINIMUM AND | | 0.370 INCHES MAXIMUM | | FASTENER LENGTH | 0.955 INCHES MINIMUM AND | | 0.985 INCHES MAXIMUM | | MATERIAL | STEEL COMP E4340 OR | | STEEL COMP 8740 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR | | MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR | | AMS 6322 ASSN STD 2ND MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM AND | | CHROMATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | HEAD STYLE | FLAT COUNTERSUNK | | HEAD DIAMETER | 0.337 INCHES MINIMUM AND | | 0.383 INCHES MAXIMUM | | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND | | 101.0 DEGREES MAXIMUM | | INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 | | GRIP LENGTH | 0.615 INCHES MINIMUM AND | | 0.635 INCHES MAXIMUM | | GRIP DIAMETER | 0.1885 INCHES MINIMUM AND | | 0.1895 INCHES MAXIMUM | | SURFACE FINISH | 32.0 MICROINCHES GRIP | | 32.0 MICROINCHES THREADS | | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 0.782 INCHES MINIMUM AND | | 0.832 INCHES MAXIMUM FIRST HOLE | | SHANK UNTHREADED HOLE DIAMETER | 0.070 INCHES MINIMUM AND | | 0.080 INCHES MAXIMUM FIRST HOLE |
|
|