|
|
|
National Stock Number:
5305-01-164-4481
Federal Supply Class:
5305
National Item Identification Number:
011644481
Description:
SCREW ASSEMBLY,PANEL
Detail:
A HEADED, THREADED FASTENING DEVICE OVER WHICH MAY BE ASSEMBLED; (1) A STAND-OFF; (2) A FLANGED BUSHING WITH WASHER(S) AND/OR A SHOULDERED BUSHING WITHOUT A FLANGE, OR IT MAY HAVE AN INTERNALLY THREADED SLEEVE THAT IS AN INTEGRAL PART OF THE SCREW; A WASHER AND AN EXTERNALLY THREAD SELF-LOCKING BUSHING THAT IS DRIVEN BY AN INSERTED DRIVER. ATTACHED TO PANEL BY THREADED BUSHING OR BY FLARING END OF STAND-OFF, OR BUSHING. USED IN CONJUNCTION WITH A SPEED NUT, NUT PLATE, OR DRIVEN INTO A THREADED HOLE IN THE ITEM THAT THE PANEL IS FASTENED TO. MAY BE SPRING LOADED.
|
Manufacturer Information:
| 5189110-005 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 53-99-231-24 | 94222 | SOUTHCO INC |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNF | | NOMINAL THREAD DIAMETER | 0.190 INCHES | | THREAD QUANTITY PER INCH | 32 | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.355 INCHES MINIMUM AND | | 0.395 INCHES MAXIMUM | | FASTENER LENGTH | 1.240 INCHES MINIMUM AND | | 1.260 INCHES MAXIMUM | | MATERIAL | STEEL CORROSION RESISTING SPRING | | STEEL CORROSION RESISTING STAND-OFF | | STEEL CORROSION RESISTING FASTENER | | MATERIAL DOCUMENT AND CLASSIFICATION | FED-STD-66 FED STD SINGLE MATERIAL RESPONSE SPRING | | FED-STD-66 FED STD SINGLE MATERIAL RESPONSE STAND-OFF | | FED-STD-66 FED STD SINGLE MATERIAL RESPONSE FASTENER | | SURFACE TREATMENT | PASSIVATE SPRING | | PASSIVATE STAND-OFF | | PASSIVATE FASTENER | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35,TY 2 FED SPEC SINGLE TREATMENT RESPONSE SPRING | | QQ-P-35,TY 2 FED SPEC SINGLE TREATMENT RESPONSE STAND-OFF | | QQ-P-35,TY 2 FED SPEC SINGLE TREATMENT RESPONSE FASTENER | | HEAD STYLE | HEXAGON | | HEAD HEIGHT | 0.240 INCHES MINIMUM AND | | 0.260 INCHES MAXIMUM | | WIDTH BETWEEN FLATS | 0.425 INCHES MINIMUM AND | | 0.438 INCHES MAXIMUM | | INTERNAL DRIVE STYLE | SLOT | | MATERIAL ACCOMMODATED THICKNESS | 0.115 INCHES MINIMUM AND | | 0.135 INCHES MAXIMUM |
|
|