|
|
|
National Stock Number:
5305-01-156-6313
Federal Supply Class:
5305
National Item Identification Number:
011566313
Description:
SCREW,CLOSE TOLERANCE
Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
|
Manufacturer Information:
| BM19031-7-20D | 17446 | HUCK INTERNATIONAL, INC | | BM19031-7-20D | 97928 | HUCK INTL INC |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNJF | | NOMINAL THREAD DIAMETER | 0.438 INCHES | | THREAD QUANTITY PER INCH | 20 | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.466 INCHES NOMINAL | | FASTENER LENGTH | 1.700 INCHES MINIMUM AND | | 1.747 INCHES MAXIMUM | | MATERIAL | STEEL OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MAC P.S.1314 FSCM 76301 MFR REF SINGLE TREATMENT RESPONSE OVERALL | | HEAD STYLE | FLAT COUNTERSUNK | | HEAD DIAMETER | 0.880 INCHES MINIMUM AND | | 0.890 INCHES MAXIMUM | | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND | | 101.0 DEGREES MAXIMUM | | INTERNAL DRIVE STYLE | HIGH-TORQUE | | GRIP LENGTH | 0.428 INCHES MINIMUM AND | | 0.448 INCHES MAXIMUM | | GRIP DIAMETER | 0.4360 INCHES MINIMUM AND | | 0.4370 INCHES MAXIMUM | | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 1.394 INCHES MINIMUM AND | | 1.431 INCHES MAXIMUM FIRST HOLE | | SHANK UNTHREADED HOLE DIAMETER | 0.106 INCHES MINIMUM AND | | 0.111 INCHES MAXIMUM FIRST HOLE | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 17446 | | DESIGN CONTROL REFERENCE | BM19031-7-20D |
|
|