|
|
|
National Stock Number:
5305-01-154-4325
Federal Supply Class:
5305
National Item Identification Number:
011544325
Description:
SCREW ASSEMBLY,PANEL
Detail:
A HEADED, THREADED FASTENING DEVICE OVER WHICH MAY BE ASSEMBLED; (1) A STAND-OFF; (2) A FLANGED BUSHING WITH WASHER(S) AND/OR A SHOULDERED BUSHING WITHOUT A FLANGE, OR IT MAY HAVE AN INTERNALLY THREADED SLEEVE THAT IS AN INTEGRAL PART OF THE SCREW; A WASHER AND AN EXTERNALLY THREAD SELF-LOCKING BUSHING THAT IS DRIVEN BY AN INSERTED DRIVER. ATTACHED TO PANEL BY THREADED BUSHING OR BY FLARING END OF STAND-OFF, OR BUSHING. USED IN CONJUNCTION WITH A SPEED NUT, NUT PLATE, OR DRIVEN INTO A THREADED HOLE IN THE ITEM THAT THE PANEL IS FASTENED TO. MAY BE SPRING LOADED.
|
Manufacturer Information:
| 5305PL0783930 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | C7997-3-8 | 17446 | HUCK INTERNATIONAL, INC | | D7910HF-3-8 | 0HDW7 | HUCK INTERNATIONAL, INC. | | CA2834-8 | 29372 | HOWMET GLOBAL FASTENING SYSTEMS INC. | | C7997-3-8 | 58794 | FASTENER TECHNOLOGY CORP | | C7997-3-8 | 81755 | LOCKHEED MARTIN CORPORATION | | D7910HF-3-8 | 97928 | HUCK INTL INC |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNF | | NOMINAL THREAD DIAMETER | 0.190 INCHES | | THREAD QUANTITY PER INCH | 32 | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.297 INCHES MINIMUM AND | | 0.327 INCHES MAXIMUM | | FASTENER LENGTH | 1.055 INCHES MINIMUM AND | | 1.085 INCHES MAXIMUM | | MATERIAL | STEEL COMP 302 OR | | STEEL COMP 303 OR | | STEEL COMP 304 OR | | STEEL COMP 304L SPRING | | STEEL COMP 302 OR | | STEEL COMP 302B OR | | STEEL COMP 303PB OR | | STEEL COMP 304L STAND-OFF | | STEEL COMP 303 PLUS X OR | | STEEL COMP 303SE OR | | STEEL COMP 303CU OR | | STEEL COMP 303MA OR | | STEEL COMP 304L FASTENER | | SURFACE TREATMENT | PASSIVATE SPRING | | PASSIVATE STAND-OFF | | PASSIVATE FASTENER | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE SPRING | | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE STAND-OFF | | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE FASTENER | | HEAD STYLE | HEXAGON EXTENDED WASHER | | HEAD HEIGHT | 0.180 INCHES NOMINAL | | WIDTH BETWEEN FLATS | 0.290 INCHES MINIMUM AND | | 0.330 INCHES MAXIMUM | | EXTENDED WASHER DIAMETER | 0.350 INCHES MINIMUM AND | | 0.390 INCHES MAXIMUM | | EXTENDED WASHER THICKNESS | 0.019 INCHES MINIMUM AND | | 0.031 INCHES MAXIMUM |
|
|