5305-01-144-3883, SCREW,EXTERNALLY RELIEVED BODY

National Stock Number:
5305-01-144-3883

Federal Supply Class:
5305

National Item Identification Number:
011443883

Description:
SCREW,EXTERNALLY RELIEVED BODY

Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.

Manufacturer Information:

SM-B-679794-5

80063

US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR

Techincal Specification:

DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER	0.495 INCHES NOMINAL0.495 INCHES NOMINAL
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY	11
FASTENER LENGTH	0.844 INCHES MINIMUM AND 0.844 INCHES MINIMUM AND 0.875 INCHES MAXIMUM0.875 INCHES MAXIMUM
FIRST DIAMETER FROM HEAD	0.150 INCHES MINIMUM AND 0.150 INCHES MINIMUM AND 0.154 INCHES MAXIMUM0.154 INCHES MAXIMUM
HEAD DIAMETER	0.357 INCHES MINIMUM AND 0.357 INCHES MINIMUM AND 0.373 INCHES MAXIMUM0.373 INCHES MAXIMUM
HEAD HEIGHT	0.122 INCHES MINIMUM AND 0.122 INCHES MINIMUM AND 0.133 INCHES MAXIMUM0.133 INCHES MAXIMUM
HEAD STYLE	PANPAN
INTERNAL DRIVE STYLE	CROSS RECESS TYPE 1CROSS RECESS TYPE 1
MATERIAL	STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 309 OR STEEL COMP 310 OR STEEL COMP 310S OR STEEL COMP 314 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 384 OR STEEL COMP 385 OVERALL
NOMINAL THREAD DIAMETER	0.190 INCHES0.190 INCHES
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALLQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	PASSIVATE OVERALLPASSIVATE OVERALL
THREAD CLASS	2A2A
THREAD DIRECTION	RIGHT-HANDRIGHT-HAND
THREAD LENGTH	0.380 INCHES MINIMUM0.380 INCHES MINIMUM
THREAD QUANTITY PER INCH	2424
THREAD SERIES DESIGNATOR	UNIFIED NATIONAL COARSE (UNC)UNIFIED NATIONAL COARSE (UNC)

Click here to Register for Free 30-day Trial