5305-01-138-5486, SCREW,EXTERNALLY RELIEVED BODY

National Stock Number:
5305-01-138-5486

Federal Supply Class:
5305

National Item Identification Number:
011385486

Description:
SCREW,EXTERNALLY RELIEVED BODY

Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.

Manufacturer Information:

0126204-1	02227	NAVAL ELECTRONIC SYSTEMS SECURITY ENGINEERING CENTER
619-8395-001	13499	ROCKWELL COLLINS, INC.

Techincal Specification:

DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF THIRD DIAMETER	3.080 INCHES NOMINAL3.080 INCHES NOMINAL
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER	0.560 INCHES NOMINAL0.560 INCHES NOMINAL
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FOURTH DIAMETER	3.465 INCHES NOMINAL3.465 INCHES NOMINAL
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SECOND DIAMETER	0.589 INCHES MINIMUM AND 0.589 INCHES MINIMUM AND 0.592 INCHES MAXIMUM0.592 INCHES MAXIMUM
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY	44
FASTENER LENGTH	3.965 INCHES NOMINAL3.965 INCHES NOMINAL
FIRST DIAMETER FROM HEAD	0.272 INCHES NOMINAL0.272 INCHES NOMINAL
FOURTH DIAMETER FROM HEAD	0.117 INCHES MINIMUM AND 0.117 INCHES MINIMUM AND 0.127 INCHES MAXIMUM0.127 INCHES MAXIMUM
HEAD DIAMETER	0.312 INCHES NOMINAL0.312 INCHES NOMINAL
HEAD HEIGHT	0.200 INCHES NOMINAL0.200 INCHES NOMINAL
HEAD STYLE	FLAT CHAMFERFLAT CHAMFER
INTERNAL DRIVE STYLE	SLOTSLOT
MATERIAL DOCUMENT AND CLASSIFICATION	ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OVERALLASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	STEEL COMP 303 OVERALLSTEEL COMP 303 OVERALL
NOMINAL THREAD DIAMETER	0.138 INCHES0.138 INCHES
SECOND DIAMETER FROM HEAD	0.210 INCHES MINIMUM AND 0.210 INCHES MINIMUM AND 0.213 INCHES MAXIMUM0.213 INCHES MAXIMUM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALLQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	PASSIVATE OVERALLPASSIVATE OVERALL
THREAD CLASS	2A2A
THREAD DIRECTION	RIGHT-HANDRIGHT-HAND
THIRD DIAMETER FROM HEAD	0.272 INCHES NOMINAL0.272 INCHES NOMINAL
THREAD LENGTH	0.500 INCHES NOMINAL0.500 INCHES NOMINAL
THREAD QUANTITY PER INCH	3232
THREAD SERIES DESIGNATOR	UNIFIED NATIONAL COARSE (UNC)UNIFIED NATIONAL COARSE (UNC)

Click here to Register for Free 30-day Trial