5935-01-135-7828 CONNECTOR,RECEPTACLE,ELECTRICAL Index 1290-01-135-7830 INTERFACE UNIT,FIRE CONTROL

National Stock Number:
5305-01-135-7829

Federal Supply Class:
5305

National Item Identification Number:
011357829

Description:
SCREW ASSEMBLY,PANEL

Detail:
A HEADED, THREADED FASTENING DEVICE OVER WHICH MAY BE ASSEMBLED; (1) A STAND-OFF; (2) A FLANGED BUSHING WITH WASHER(S) AND/OR A SHOULDERED BUSHING WITHOUT A FLANGE, OR IT MAY HAVE AN INTERNALLY THREADED SLEEVE THAT IS AN INTEGRAL PART OF THE SCREW; A WASHER AND AN EXTERNALLY THREAD SELF-LOCKING BUSHING THAT IS DRIVEN BY AN INSERTED DRIVER. ATTACHED TO PANEL BY THREADED BUSHING OR BY FLARING END OF STAND-OFF, OR BUSHING. USED IN CONJUNCTION WITH A SPEED NUT, NUT PLATE, OR DRIVEN INTO A THREADED HOLE IN THE ITEM THAT THE PANEL IS FASTENED TO. MAY BE SPRING LOADED.


Manufacturer Information:
5305PL07839069009HINSPEKTORAT WSPARCIA SIL ZBROJNYCH
5305PL17581179009HINSPEKTORAT WSPARCIA SIL ZBROJNYCH
583R880H0217446HUCK INTERNATIONAL, INC
583R880H0258794FASTENER TECHNOLOGY CORP
583R880H0297928HUCK INTL INC
583R880H0297942NORTHROP GRUMMAN SYSTEMS CORPORATION
FT1031-258794FASTENER TECHNOLOGY CORP


Techincal Specification:
THREAD SERIES DESIGNATORUNJF
NOMINAL THREAD DIAMETER0.190 INCHES
THREAD QUANTITY PER INCH32
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.250 INCHES NOMINAL
FASTENER LENGTH0.884 INCHES NOMINAL
MATERIALSTEEL COMP 301 SECONDARY WASHER
STEEL COMP 301 OR
STEEL COMP 302 OR
STEEL COMP 302B OR
STEEL COMP 303 OR
STEEL COMP 303SE OR
STEEL COMP 304 OR
STEEL COMP 304L OR
STEEL COMP 305 OR
STEEL COMP 308 OR
STEEL COMP 309 OR
STEEL COMP 309S OR
STEEL COMP 310 OR
STEEL COMP 310S OR
STEEL COMP 314 OR
STEEL COMP 316 OR
STEEL COMP 316L OR
STEEL COMP 317 OR
STEEL COMP 321 OR
STEEL COMP 347 OR
STEEL COMP 348 OR
STEEL COMP 384 OR
STEEL COMP 385 PRIMARY WASHER
STEEL COMP 302 SPRING
ALUMINUM ALLOY 6061 STAND-OFF
STEEL COMP 302 FASTENER
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE SECONDARY WASHER
66 FED STD ALL MATERIAL RESPONSES PRIMARY WASHER
A580 ASSN STD SINGLE MATERIAL RESPONSE SPRING
QQ-A-255/8 FED SPEC SINGLE MATERIAL RESPONSE STAND-OFF
ASTM A493 ASSN STD SINGLE MATERIAL RESPONSE FASTENER
SURFACE TREATMENTPASSIVATE SECONDARY WASHER
PASSIVATE PRIMARY WASHER
PASSIVATE SPRING
ANODIZE STAND-OFF
PASSIVATE FASTENER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE SECONDARY WASHER
QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE PRIMARY WASHER
QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE SPRING
MIL-S-8625 MIL SPEC SINGLE TREATMENT RESPONSE STAND-OFF
QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE FASTENER
MINIMUM TENSILE STRENGTH80000 POUNDS PER SQUARE INCH
HEAD STYLEHEXAGON
HEAD HEIGHT0.181 INCHES MINIMUM AND
0.187 INCHES MAXIMUM
WIDTH BETWEEN FLATS0.305 INCHES MINIMUM AND
0.313 INCHES MAXIMUM
INTERNAL DRIVE STYLEHEXAGON
WIDTH ACROSS FLATS0.156 INCHES NOMINAL
MATERIAL ACCOMMODATED THICKNESS0.188 INCHES MINIMUM AND
0.250 INCHES MAXIMUM


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us