5305-01-135-1153, SCREW,CLOSE TOLERANCE

National Stock Number:
5305-01-135-1153

Federal Supply Class:
5305

National Item Identification Number:
011351153

Description:
SCREW,CLOSE TOLERANCE

Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.

Manufacturer Information:

106706H-5-A24	56878	SPS TECHNOLOGIES, LLC
106706H-5-A24	80539	SPS TECHNOLOGIES, LLC
H148-5-24	17446	HUCK INTERNATIONAL, INC
GB510BC5-24	26512	NORTHROP GRUMMAN SYSTEMS CORPORATION
HT8171-5-24	92215	HOWMET GLOBAL FASTENING SYSTEMS INC
H148-5-24	97928	HUCK INTL INC

Techincal Specification:

COUNTERSINK ANGLE	99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH	1.964 INCHES MINIMUM AND 2.011 INCHES MAXIMUM
GRIP DIAMETER	0.3108 INCHES MINIMUM AND 0.3117 INCHES MAXIMUM
GRIP LENGTH	1.490 INCHES MINIMUM AND 1.510 INCHES MAXIMUM
HARDNESS RATING	46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER	0.573 INCHES MINIMUM AND 0.635 INCHES MAXIMUM
HEAD STYLE	FLAT COUNTERSUNK
INTERNAL DRIVE STYLE	HIGH-TORQUE
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
PART NAME ASSIGNED BY CONTROLLING AGENCY	NAVY SPECIAL PROJECT
MATERIAL	STEEL COMP H11 OVERALL
MINIMUM TENSILE STRENGTH	220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.312 INCHES
SURFACE FINISH	32.0 MICROINCHES GRIP
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	NAS 672 ASSN STD 1ST TREATMENT RESPONSE OR MIL-C-8837 TY 2 CL 2 MIL SPEC 2ND TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	CADMIUM OR CADMIUM AND CHROMATE OVERALL
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.454 INCHES MINIMUM AND 0.521 INCHES MAXIMUM
THREAD SERIES DESIGNATOR	UNIFIED NATIONAL JOINT FINE (UNJF)
THREAD QUANTITY PER INCH	24

Click here to Register for Free 30-day Trial