|
|
|
National Stock Number:
5305-01-133-2197
Federal Supply Class:
5305
National Item Identification Number:
011332197
Description:
SCREW ASSEMBLY,PANEL
Detail:
A HEADED, THREADED FASTENING DEVICE OVER WHICH MAY BE ASSEMBLED; (1) A STAND-OFF; (2) A FLANGED BUSHING WITH WASHER(S) AND/OR A SHOULDERED BUSHING WITHOUT A FLANGE, OR IT MAY HAVE AN INTERNALLY THREADED SLEEVE THAT IS AN INTEGRAL PART OF THE SCREW; A WASHER AND AN EXTERNALLY THREAD SELF-LOCKING BUSHING THAT IS DRIVEN BY AN INSERTED DRIVER. ATTACHED TO PANEL BY THREADED BUSHING OR BY FLARING END OF STAND-OFF, OR BUSHING. USED IN CONJUNCTION WITH A SPEED NUT, NUT PLATE, OR DRIVEN INTO A THREADED HOLE IN THE ITEM THAT THE PANEL IS FASTENED TO. MAY BE SPRING LOADED.
|
Manufacturer Information:
| 91925-11 | 15280 | NORTHROP GRUMMAN SYSTEMS CORPORATION DIV ES DEFENSIVE SYSTEMS DIVISION | | 91925-11 | 26916 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | DPC7900-4-A-2 | 0HDW7 | HUCK INTERNATIONAL, INC. | | DPC7900-4-A-2 | 17446 | HUCK INTERNATIONAL, INC | | CS6006P-11 | 58998 | FASTENER INNOVATION TECHNOLOGY, INC. | | DPC7900-4-A-2 | 97928 | HUCK INTL INC | | FT1500-4-1-2 | 58794 | FASTENER TECHNOLOGY CORP |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNC | | NOMINAL THREAD DIAMETER | 0.112 INCHES | | THREAD QUANTITY PER INCH | 40 | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.223 INCHES MINIMUM AND | | 0.243 INCHES MAXIMUM | | FASTENER LENGTH | 0.410 INCHES NOMINAL | | MATERIAL | COPPER STAND-OFF | | STEEL COMP 4037 FASTENER | | SURFACE TREATMENT | CADMIUM STAND-OFF | | CADMIUM FASTENER | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TY 1 CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE STAND-OFF | | QQ-P-416 TY 1 CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE FASTENER | | HARDNESS RATING | 34.0 ROCKWELL C MINIMUM AND | | 38.0 ROCKWELL C MAXIMUM OVERALL | | HEAD STYLE | FLAT COUNTERSUNK | | HEAD DIAMETER | 0.317 INCHES NOMINAL | | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND | | 101.0 DEGREES MAXIMUM | | MATERIAL ACCOMMODATED THICKNESS | 0.078 INCHES MINIMUM AND | | 0.100 INCHES MAXIMUM |
|
|