5305-01-129-9034, SCREW ASSEMBLY,PANEL

4320-01-129-9033 SEAL ASSEMBLY,SHAFT,SPRING LOADE

5995-01-129-9035 CABLE ASSEMBLY,SPECIAL PURPOSE,E

National Stock Number:
5305-01-129-9034

Federal Supply Class:
5305

National Item Identification Number:
011299034

Description:
SCREW ASSEMBLY,PANEL

Detail:
A HEADED, THREADED FASTENING DEVICE OVER WHICH MAY BE ASSEMBLED; (1) A STAND-OFF; (2) A FLANGED BUSHING WITH WASHER(S) AND/OR A SHOULDERED BUSHING WITHOUT A FLANGE, OR IT MAY HAVE AN INTERNALLY THREADED SLEEVE THAT IS AN INTEGRAL PART OF THE SCREW; A WASHER AND AN EXTERNALLY THREAD SELF-LOCKING BUSHING THAT IS DRIVEN BY AN INSERTED DRIVER. ATTACHED TO PANEL BY THREADED BUSHING OR BY FLARING END OF STAND-OFF, OR BUSHING. USED IN CONJUNCTION WITH A SPEED NUT, NUT PLATE, OR DRIVEN INTO A THREADED HOLE IN THE ITEM THAT THE PANEL IS FASTENED TO. MAY BE SPRING LOADED.

Manufacturer Information:

10115219	A486G	NIMIKKEISTOKESKUS NCB FINLAND
965875-122C	82577	RAYTHEON COMPANY
CPRL7900-6-B-3.5	0HDW7	HUCK INTERNATIONAL, INC.
FT1171-122	58794	FASTENER TECHNOLOGY CORP
CS1026P06-3.5-2	58998	FASTENER INNOVATION TECHNOLOGY, INC.
CPRL7900-6-B-3.5	97928	HUCK INTL INC

Techincal Specification:

FASTENER LENGTH	0.583 INCHES MINIMUM AND 0.613 INCHES MAXIMUM
HEAD DIAMETER	0.305 INCHES MINIMUM AND 0.315 INCHES MAXIMUM
HEAD HEIGHT	0.077 INCHES MINIMUM AND 0.107 INCHES MAXIMUM
HEAD STYLE	PAN
INTERNAL DRIVE STYLE	CROSS RECESS TYPE 1
MATERIAL ACCOMMODATED THICKNESS	0.063 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	ASTM-A-493 ASSN STD SINGLE MATERIAL RESPONSE FASTENER
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-23195 MIL SPEC SINGLE MATERIAL RESPONSE STAND-OFF
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE PRIMARY WASHER
MATERIAL	STEEL COMP 301 PRIMARY WASHER
MATERIAL	STEEL COMP 302 FASTENER
MATERIAL	STEEL COMP 304 STAND-OFF
MINIMUM TENSILE STRENGTH	112000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.138 INCHES
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE FASTENER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE PRIMARY WASHER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE STAND-OFF
SURFACE TREATMENT	PASSIVATE FASTENER
SURFACE TREATMENT	PASSIVATE PRIMARY WASHER
SURFACE TREATMENT	PASSIVATE STAND-OFF
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.188 INCHES MINIMUM AND 0.218 INCHES MAXIMUM
THREAD SERIES DESIGNATOR	UNIFIED NATIONAL COARSE (UNC)
THREAD QUANTITY PER INCH	32

Click here to Register for Free 30-day Trial