|
|
|
National Stock Number:
5305-01-118-8867
Federal Supply Class:
5305
National Item Identification Number:
011188867
Description:
SCREW,CLOSE TOLERANCE
Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
|
Manufacturer Information:
| 106750-4-21 | 80539 | SPS TECHNOLOGIES, LLC | | A147-4-21 | 17446 | HUCK INTERNATIONAL, INC | | BM19025-4-21 | 17446 | HUCK INTERNATIONAL, INC | | GB510L4-21 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | A147-4-21 | 97928 | HUCK INTL INC | | BM19025-4-21 | 97928 | HUCK INTL INC | | HT8043-4-21 | 06950 | HOWMET GLOBAL FASTENING SYSTEMS INC | | HT239P8-4-21 | 73197 | HI-SHEAR CORPORATION | | HT8043-4-21 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC | | HT239P8-4-21 | L4528 | LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INC |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNJF | | NOMINAL THREAD DIAMETER | 0.250 INCHES | | THREAD QUANTITY PER INCH | 28 | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.290 INCHES MINIMUM AND | | 0.357 INCHES MAXIMUM | | FASTENER LENGTH | 1.612 INCHES MINIMUM AND | | 1.659 INCHES MAXIMUM | | MATERIAL | STEEL COMP E4340 OR | | STEEL COMP 4140 OR | | STEEL COMP 8740 OR | | STEEL COMP 8735 OR | | STEEL COMP 6150 OVERALL | | SURFACE TREATMENT | CADMIUM AND | | CHROMATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TYPE 2 CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 36.0 ROCKWELL C MINIMUM AND | | 40.0 ROCKWELL C MAXIMUM OVERALL | | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH | | HEAD STYLE | FLAT COUNTERSUNK | | HEAD DIAMETER | 0.390 INCHES MINIMUM AND | | 0.395 INCHES MAXIMUM | | COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL | | INTERNAL DRIVE STYLE | HIGH-TORQUE | | GRIP LENGTH | 1.302 INCHES MINIMUM AND | | 1.322 INCHES MAXIMUM | | GRIP DIAMETER | 0.2485 INCHES MINIMUM AND | | 0.2495 INCHES MAXIMUM | | SURFACE FINISH | 63.0 MICROINCHES GRIP | | 63.0 MICROINCHES THREADS |
|
|