|
|
|
National Stock Number:
5305-01-116-4817
Federal Supply Class:
5305
National Item Identification Number:
011164817
Description:
SCREW ASSEMBLY,PANEL
Detail:
A HEADED, THREADED FASTENING DEVICE OVER WHICH MAY BE ASSEMBLED; (1) A STAND-OFF; (2) A FLANGED BUSHING WITH WASHER(S) AND/OR A SHOULDERED BUSHING WITHOUT A FLANGE, OR IT MAY HAVE AN INTERNALLY THREADED SLEEVE THAT IS AN INTEGRAL PART OF THE SCREW; A WASHER AND AN EXTERNALLY THREAD SELF-LOCKING BUSHING THAT IS DRIVEN BY AN INSERTED DRIVER. ATTACHED TO PANEL BY THREADED BUSHING OR BY FLARING END OF STAND-OFF, OR BUSHING. USED IN CONJUNCTION WITH A SPEED NUT, NUT PLATE, OR DRIVEN INTO A THREADED HOLE IN THE ITEM THAT THE PANEL IS FASTENED TO. MAY BE SPRING LOADED.
|
Manufacturer Information:
| 583R580H01 | 48306 | NORTHROP GRUMMAN SUPPORT SERVICES CORP | | 583R580H01 | 97942 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | DFPQ7900-6-A-2 | 17446 | HUCK INTERNATIONAL, INC | | FT1044-6-1-2 | 58794 | FASTENER TECHNOLOGY CORP | | DFPQ7900-6A2 | 97928 | HUCK INTL INC |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNJC | | NOMINAL THREAD DIAMETER | 0.138 INCHES | | THREAD QUANTITY PER INCH | 32 | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.180 INCHES MINIMUM AND | | 0.200 INCHES MAXIMUM | | FASTENER LENGTH | 0.450 INCHES NOMINAL | | MATERIAL | STEEL COMP 420 PRIMARY WASHER | | STEEL COMP 304 STAND-OFF | | STEEL CORROSION RESISTING FASTENER | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5732 ASSN STD SINGLE MATERIAL RESPONSE OR | | AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE FASTENER | | SURFACE TREATMENT | PASSIVATE PRIMARY WASHER | | PASSIVATE STAND-OFF | | PASSIVATE FASTENER | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE PRIMARY WASHER | | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE STAND-OFF | | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE FASTENER | | HEAD STYLE | FILLISTER | | HEAD DIAMETER | 0.255 INCHES MINIMUM AND | | 0.275 INCHES MAXIMUM | | HEAD HEIGHT | 0.082 INCHES MINIMUM AND | | 0.102 INCHES MAXIMUM | | INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 | | MATERIAL ACCOMMODATED THICKNESS | 0.078 INCHES MINIMUM AND | | 0.140 INCHES MAXIMUM |
|
|