|
|
|
National Stock Number:
5305-01-113-0548
Federal Supply Class:
5305
National Item Identification Number:
011130548
Description:
SCREW ASSEMBLY,PANEL
Detail:
A HEADED, THREADED FASTENING DEVICE OVER WHICH MAY BE ASSEMBLED; (1) A STAND-OFF; (2) A FLANGED BUSHING WITH WASHER(S) AND/OR A SHOULDERED BUSHING WITHOUT A FLANGE, OR IT MAY HAVE AN INTERNALLY THREADED SLEEVE THAT IS AN INTEGRAL PART OF THE SCREW; A WASHER AND AN EXTERNALLY THREAD SELF-LOCKING BUSHING THAT IS DRIVEN BY AN INSERTED DRIVER. ATTACHED TO PANEL BY THREADED BUSHING OR BY FLARING END OF STAND-OFF, OR BUSHING. USED IN CONJUNCTION WITH A SPEED NUT, NUT PLATE, OR DRIVEN INTO A THREADED HOLE IN THE ITEM THAT THE PANEL IS FASTENED TO. MAY BE SPRING LOADED.
|
Manufacturer Information:
| 583R891H01 | 97942 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | CA1370-08-3-11PPQ | 29372 | HOWMET GLOBAL FASTENING SYSTEMS INC. | | DP79508F-C-11 | 17446 | HUCK INTERNATIONAL, INC | | DP79508F-C-11 | 97928 | HUCK INTL INC |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNC | | NOMINAL THREAD DIAMETER | 0.164 INCHES | | THREAD QUANTITY PER INCH | 32 | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.295 INCHES MINIMUM AND | | 0.325 INCHES MAXIMUM | | FASTENER LENGTH | 0.668 INCHES MINIMUM AND | | 0.708 INCHES MAXIMUM | | MATERIAL | ALUMINUM ALLOY 7075 STAND-OFF | | STEEL COMP 301 OR | | STEEL COMP 302 OR | | STEEL COMP 302B OR | | STEEL COMP 303 OR | | STEEL COMP 303SE OR | | STEEL COMP 304 OR | | STEEL COMP 304L OR | | STEEL COMP 305 OR | | STEEL COMP 308 OR | | STEEL COMP 309 OR | | STEEL COMP 309S OR | | STEEL COMP 310 OR | | STEEL COMP 310S OR | | STEEL COMP 314 OR | | STEEL COMP 316 OR | | STEEL COMP 316L OR | | STEEL COMP 317 OR | | STEEL COMP 321 OR | | STEEL COMP 347 OR | | STEEL COMP 348 OR | | STEEL COMP 384 OR | | STEEL COMP 385 FASTENER | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/9 FED SPEC SINGLE MATERIAL RESPONSE STAND-OFF | | SURFACE TREATMENT | CHROMATE STAND-OFF | | PASSIVATE FASTENER | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541 CLASS 3 MIL SPEC SINGLE TREATMENT RESPONSE STAND-OFF | | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE FASTENER | | HEAD STYLE | PAN | | HEAD DIAMETER | 0.292 INCHES MINIMUM AND | | 0.332 INCHES MAXIMUM | | HEAD HEIGHT | 0.170 INCHES MAXIMUM | | MATERIAL ACCOMMODATED THICKNESS | 0.106 INCHES MINIMUM AND | | 0.116 INCHES MAXIMUM |
|
|