|
|
|
National Stock Number:
5305-01-111-7263
Federal Supply Class:
5305
National Item Identification Number:
011117263
Description:
SCREW,CLOSE TOLERANCE
Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
|
Manufacturer Information:
| 106385FT-4-7 | 80539 | SPS TECHNOLOGIES, LLC | | 106385PT-4-7 | 56878 | SPS TECHNOLOGIES, LLC | | 106385PT-4-7 | 80539 | SPS TECHNOLOGIES, LLC | | 106385PT4-7 | 80539 | SPS TECHNOLOGIES, LLC |
|
Techincal Specification:
| COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM | | FASTENER LENGTH | 0.826 INCHES MINIMUM AND 0.856 INCHES MAXIMUM | | GRIP LENGTH | 0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM | | GRIP DIAMETER | 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM | | HEAD DIAMETER | 0.350 INCHES MINIMUM AND 0.399 INCHES MAXIMUM | | HEAD STYLE | FLAT COUNTERSUNK | | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) | | MATERIAL | STEEL COMP E4340 OR STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 8735 OR STEEL COMP 6150 OVERALL | | NOMINAL THREAD DIAMETER | 0.250 INCHES | | SURFACE FINISH | 32.0 MICROINCHES THREADS | | SURFACE FINISH | 63.0 MICROINCHES GRIP | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TY 2 CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.403 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) | | THREAD QUANTITY PER INCH | 28 |
|
|